Sport
Basketball
Football - Soccer
5-a-side football - Minisoccer
Beach soccer
Handball
Volleyball
limit crossbar in glass fiber
A494/1
Limit crossbar for the high jump in fiber of verto length cm. 400; yellow color for perfect visibility in any light condition. Approved W.A.
Accessories for Atlethics
A642
Pyramid section mark, in painted sheet, numbered according to the event, which can be used for shot put, hammer throwing, discus throwing and javelin throwing. Complete set of 12 pieces.
Related products for Pole vault
A490
Uprights for pole vaulting made of reinforced aluminum diameter 140 x 60 mm with height adjustment movement by means of a telescopic system with locking by means of a knob aluminum rod support rail made of steel with sliding of the trolley by means of nylon wheels graduated from cm. 0 to c.80. height adjustment from cm. 300 to 640. Approved W.A.
A492
Box for pole vaulting, shaped structure in hot-dip galvanized sheet metal. Regulatory measures.
A497
Landing area for pole vaulting, in full and empty differentiated density foam rubber, covered in PVC and anti-tear net in the upper part. Complete with wear mat thickness cm. 10 incorporated in the fall area, including a PVC rain cover. Falling area measures for athletics cm. 500x500x80H, slides of cm. 150/200/250/300.
Ideas for Outdoor facility
V707/1
Volleyball umpire for standing or seated, built according to FIPAV regulation, structure in painted steel, high stability base measures cm. 110 x 70 with adjustable feet, walking surface in galvanized sheet metal, adjustable platform in various heights from cm. 110 to cm. 150 by manual rack and pinion winch, round tubular railing diam. mm. 40, rear access ladder covered in non-slip material, PVC seat, complete with rubber transport wheels.
F742/5
Pair of nets for football goals, in nylon polyamide braid diam. mm. 6, extra hexagonal mesh, dimensions cm. 750x250h, high side cm. 100-low side cm. 200.
F745/3
Spray field marker trolley for ecological paints, in painted steel, equipped with electric battery pump, complete with battery charger, tank capacity Lt. 18, adjustable side marking.
V723/F
Volleyball ball with elastics, suitable for training, in blow rubber. To be used with art. V 723/B.
F745/2
Spray soccer field marker trolley, for ecological paint, with rubber wheels and front indicator wheel. This stock accessory is equipped with a plastic pressure tank for ecological paint and complete with engine.
F746
Shoes washer composed of body and removable pianted steel support rails, n2 lower brushes with plastica holder and short , stiffnylon bristles for cleaning outsole, n.2 side brushes with plastic older and nylon , long and soft bristles for upper cleaning, spray system made of galvanized steel with 4 crossed water jets with adjustable angle.
F757/2B
Pair of futsal goals with ground sleeves, painted tubular aluminium structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 400x200. Without nets.
V726/4
Player subsitution and time out kit, complete with numbered paddles, wooden case and rechargeable batteries.
V716
Volleyball umpire stand in painted steel ovoid section 60 x 30 mm., rear access ladder covered in non-slip material, protective railing in tubular diam. 30 mm., Walking surface in painted sheet metal, safety spacer, folding, measures cm. 50 x 75 height cm. 130.
M991/1
Set of 4 protections for rugby goals, square section 35x35 cm, height 200 cm, thickness 11 cm, side velcro closure.
F731/5
Pair of football goals with ground sleeves dimensions 5.00x2.00 H m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without lifting device article F731/3 and nets. Football goals tested in according to UNI EN 748.
K1220
Football-tennis kit, outdoor use, complete with net 9x1 m, supports with hooks and steel ferrule, with pickets.
F757/2
Pair of transportable futsal goals, painted tubular aluminium structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 400x200. Without nets.
F852
HD polyethylene fencing net for football fields, 10x10 cm mesh, 3 mm braid, weight 60 g / m. Used in football and futsal fields to prevent the balls from leaking from the playing field, water-repellent and UV stabilized. Dimensions on request.
T783/2
Minitennis net, in polyethylene high tenacity net, braid Ø 3 mm, manufactured without knot, mesh 40x40 mm black colour. Upper part with polyester high tenacity band 50 mm, white color, double sewing and polyester rope Ø 6 mm, white colour. Dimensions m. 7x0,75H
V730/2
Padded protection for volleyball facility V708 and V700, foam rubber, covered in PVC and velcro closure.
V700
Pair of volleyball facility model Tournament consisting of n. 2 main uprights in galvanized steel tubing diam. 70 cm., V-shaped ground base in painted steel plate, thickness mm. 8, steel tie rods 25 mm section painted with epoxy powders. Adjustment of the net by means of a special periscope slide that allows, if necessary, to lower the net to tennis height. Mains tension by means of a ratchet winch, screws for fixing to the floor.
F792
Benches for coaches / reserves model Serie A, structure in zinced tubular steel, modular and modular, expandable at any time, cover and sides in compact polycarbonate thickness mm. 3. Prepared for fixing to the ground or for transport by means of wheels, seats made of comfortable padded armchairs and covered in washable imitation leather and mounted on a base with wheels. The bench is equipped with protections in the upper front part. Dimensions and structure can be designed according to needs.
F736/1
Trolley for kick wall , in zinced steel, for 5 single shapes, complete with wheels and handle for moving.
F731/15
Pair of transportable football goals dimensions 5.00x2.00 H m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm,back basement on the ground depth cm. 150, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without nets. Football goals tested in according to UNI EN 748.
F732
Pair of transportable football goals, dimensions 7.32x2.44h m, made of aluminium profiles ovoid section 120x100 mm reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, rear base depth 200 cm and upper net support elbows in zinced steel Ø 40 mm. complete with nylon hooks, anti breakage, assembly screws in class 8.8. without nets. Football goals tested in according to UNI EN 748.
T782
Tennis net, woven polyethylene cord, Ø mm 3,5, with 6 reinforced meshes along all the length, with cable bushing in fabric and tension cable in steel Ø mm. 5. Complete with centre strap with hook and steel buckle. Regular size: length mt. 12,80, height mt. 1. Mesh cm. 4,2 x 4,2.
F748
Set of fixed corner posts for football composit by: n.4 fixed post diam. 30 mm, n.4 flags dim. 60x40 cm, n.4 clips, n.4 ground sleeves with cap. For regular fields.
BI-REBOUND
BI-REBOUND powder- coated iron frame cm.130x130, , with 1 side net mesch cm.10x10 and 1 side net mesh cm.5x5, adjustable inclination angle.
F758
Pair of nylon braid nets for futsal goals, diameter mm. 3, knotless processing, dimensions cm. 300x200h, high side cm. 100-low side cm. 100, hexagonal mesh.
V723/A
Ball-catcher, for volleyball training on reception or to increase the accuracy of the setter by placing it in the area where you want the lift. Adjustable height from 190 cm to 320 cm with tiltable upper ring. Base not included.
T797/2
Tennis court separation net, medium type windbreak for bottom tennis field, stabilized against ultra violet rays, perimeter eyeleted every 50 centimeters, density 90%, gr. 125 m2, green color, m. 18 x 2.
F852/B
Perimeter reinforcement edging for fencing net for football fields, consisting of a rope of diam. 6 mm of the same material as the mesh.
F755/1
Supporting poles with two reaches. Working arc for header, headwork tool for 2 players, in painted steel tubing, complete with ground sleeves.
V700/2
Pair of volleyball facility model Tournament consisting of n. 2 main uprights in galvanized steel tubing diam. 70 cm., V-shaped ground base in painted steel plate, thickness mm. 8, steel tie rods 25 mm section painted with epoxy powders. Adjustment of the net by means of a special periscope slide that allows, if necessary, to lower the net to tennis height. Mains tension by means of a ratchet winch. Support frame for housing ballast boxes (ballast to 125 kg each post not included).
F793
Benches for coaches / reserves model Serie A, structure in aluminium tubular steel, modular and modular, expandable at any time, cover and sides in compact polycarbonate thickness mm. 3. Prepared for fixing to the ground or for transport by means of wheels, seats made of comfortable padded armchairs and covered in washable imitation leather and mounted on a base with wheels. The bench is equipped with protections in the upper front part. Dimensions and structure can be designed according to needs.
F736/A
Set of 5 single shapes with 1 steel ferrule to be fixed only in the ground for barrier and slalom use, height adjustable from 150 cm to 190 cm.
V708/C
Volleyball facility Category A1 competition certified for international competitions, light alloy structure with internal anti-deflection ribs, additional internal reinforcement in anti-deflection steel, completely retractable net adjustment slides. The facility for adjusting the height and tension of the net is started by means of a removable handle, upper pulley in nylon. Volleyball facility supplied complete with ground sleeves to be buried, height 50 cm. Volleyball facility TÜV tested in according to UNI EN 1271
F735
Pair of football goals with ground sleeves dimensions 7,32x2,44h m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without lifting device article F731/3 and nets. Football goals tested in according to UNI EN 748.
T783
Tennis net, Torneo model, woven polyethylene cord, Ø mm 3,5,working with knot, with 6 reinforced meshes along the length, complete with polyester cable bushing, double stitching and side reinforcement with passing band. Tension cable in steel Ø mm. 5, complete with centre strap with hook and steel buckle. Regular size: length mt. 12,80, height mt. 1. Mesh cm. 4,2 x 4,2.
F748/1
set of flexible corner posts for football, composed of: n.4 flexible posts diam. 30 mm, n.4 flags dimensions cm.60x40, n.4 clips, n.4 ground sleeves with cap. For regular fields.
F758/1
Pair of nylon braid nets for soccer goals, diameter mm. 6, knotless processing, dimensions cm. 300x200h, high side cm. 100-low side cm. 100, hexagonal mesh.
V723/B
Spike essential for learning and correcting the fundamentals in volleyball: serve, block and attack. On sale excluding balloon and base.
T797/3
Tennis court separation net, extra heavy type windbreak for bottom tennis field, stabilized against ultra violet rays, perimeter eyeleted every 50 centimeters, density 90%, gr. 180 m2, green color, m. 18 x 2.
F740/1
Pair of nets for reduced football goals, made of polypropylene diameter mm.3, without knot,dimensions cm.650x250 upper depth cm.100- lower depth cm. 150.
K859/1
Wall protection made of high density polyethylene covered with colour pvc, thickness mm.22, scratchproof, no-toxic, fireproof class 1.Certificate in reference at UNI EN 913.
F737
Extendable and sliding tunnel for stadiums and football fields on wheels to protect players from entering the locker room and indoor and outdoor playing fields. Supporting structure in aluminum, hinges and connections in steel painted with polyurethane powders, coated fabric in fireproof class M2 PVC. Dimensions: width 2 m, total height 2.4 m. Other sizes on request.
F731/8
Pair of transportable football goals made of aluminium Ø 80 mm, dimensions 5.00x2.00 m, reinforced with internal anti-bending ribs; backside support structure in steel Ø 30 mm, complete with nylon hooks, anti breakage. Without nets
F735/PS
Pair of football goals with ground sleeves dimensions 7,32x2,44h m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, detached posts in zinced steel Ø 48 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without lifting device article F731/3 and nets. Football goals tested in according to UNI EN 748.
T783/1
Tennis net Super Torneo, braided network of high tenacity polyethylene diam.mm3, UV-stabilized, heat-set in an autoclave, water repellent, knot working mm.42x42 black shirt, the top six double mesh reinforcement, fixed with double stitching the white band in high tenacity polyester and mm.50 diam.mm.5 galvanized steel cable, two loops on the ends to draw the network center polyester mesh with steel buckle and hook included.
T801
Paddle facility in according to regulations, in painted steel section mm. 80x80, complete with brass net tensioning winch and plate for fixing on the ground.
V723/C
Telescopic jump tester for measuring the height of the jump; can be adjusted by cm. 230 to cm. 380; base not included.
F740/15
Pair of nets for reduced football goals, made of polypropylene diameter mm.3, without knot,dimensions cm.500x200 upper depth cm.100- lower depth cm. 150.
K859/3
Column protection made of high density polyethylene covered with colour pvc, thickness mm.22, scratchproof, no-toxic, fireproof class 1. Certificate in reference at UNI EN 913.
V708
Volleyball facility model Gara transportable on wheels consisting of 2 uprights in aluminum ovoid section mm. 120 x 100 reinforced internally, adjustment of the net by means of periscope slides inside the structure, tensioning of the net by means of a rack and pinion winch, ground support base in steel sheet mm. 8 laser cut with fixing holes at center distance cm. 47, reinforcement rods Ø mm. 25. The facility is supplied complete with anchor bolts and concealed screws MA 14 for fixing. Volleyball facility TÜV tested in according to UNI EN 1271
202010
Volleyball accessories: net stretching winch, for our following volleyball systems: V700, V700/2,V703/T,V703/TR, V704/T,V708, V708/R
F731/8B
Pair of football goals made of aluminium Ø 80 mm with ground sleeves, dimensions 5.00x2.00 m, reinforced with internal anti-bending ribs; backside support structure in steel Ø 30 mm, complete with nylon hooks, anti breakage. Without nets
T785
Central tape strap for tennis net, in polyester white colour, width mm. 50, complete with hook and steel buckle.
F730
Pair of transportable football goals, dimensions 7.32x2.44 H. m, made of stable reinforced aluminum profiles, oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, nets supports in zinced steel diam. 40 mm, back basement on the ground depth m. 2 in aluminum in oval section 120x100 mm complete with guide for inserting hooks for perfect net tension. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without net. Football goals tested in according to UNI EN 748.
F749/0
Football scoreboard for players substitution. Handy model, double side. Numbers from 1 to 99, fluorescent yellow or orange.
T800
Paddle net made of polyethylene HD yarns, stabilized UV rays, waterproof, thermo-fixed, knotless. On the upper side: heavy polyester band 100 mm fixed with double sewing and steel cable 12,50 m. Other sides finished with reinforcement and additional fixing rope.
Completed with central band with hook and buckle.
V723/D
Spike with articulated and adjustable arms for volleyball and minivolley training, protected by soft safety polyurethane. With this tool it is possible to evaluate the way in which the ball is hit and the trajectory it takes. Base and balloon not included.
T780
Tennis facility for outdoor, in painted steel tube, square section mm. 80 x 80, complete with ground sleeves and brass tensioners.
F740/2
Pair of nets for futsal goals m. 4x2, made of nylon braid diameter mm.3, without knot, upper depth cm.100- lower depth cm. 100.
F746/4
Protection for coach bench in foam rubber, half moon shape, with covering in colored PVC with velcro for fixing.
V703/T
Monotubular volleyball system consisting of 2 main uprights in galvanized steel tubing diam. mm. 70 x 3, adjustment of the net by means of periscope slides in galvanized steel diam. mm. 76 and tension of the same by means of a ratchet winch. The volleyball facility is complete with ground sleeves to be buried for a depth of cm. 42 with diam. external mm. 76 and complete with covers in galvanized steel.
F758/0
Pair of nets for futsal goals in polyethylene braid, diameter 3 mm, UV stabilized, water-repellent, heat-set, knot-knot, mesh 12x12 cm, dimensions 300x200h cm.
F756/2
Pair of mini football goals, in painted steel Ø mm 40. Dimensions 150 x 110 cm. Without nets.
A490
Uprights for pole vaulting made of reinforced aluminum diameter 140 x 60 mm with height adjustment movement by means of a telescopic system with locking by means of a knob aluminum rod support rail made of steel with sliding of the trolley by means of nylon wheels graduated from cm. 0 to c.80. height adjustment from cm. 300 to 640. Approved W.A.
F730/1
Pair of transportable football goals, dimensions 6.00x2.00 m, made of stable reinforced aluminum profiles, oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, nets supports in zinced steel diam. 40 mm, back basement on the ground depth m. 2 in aluminum in oval section 120x100 mm complete with guide for inserting hooks for perfect net tension. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without nets. Football goals tested in according to UNI EN 748.
F749/1
Set of numbers for player substitution. Numbers from 1 to 30. Double, plasticized, without hand grip, yellow color.
F740/7
Pair of nets for football goals in HT polypropylene braid, mesh 110x100 mm
Wire diameter Ø 6 mm, UV stabilized, heat set, water repellent. Knotless in a square knit, fully edged on the perimeter to ensure greater strength and durability. Complete with rope for hooking.
V723/M
Wall simulator with irregular surface panel for training in attack and defense in volleyball. It causes the ball to bounce at unpredictable angles. Didactic and preparatory tool for the correction and improvement of the attack and coverage of the attack. Adjustable in height up to 370 cm, swiveling towards the inside or outside of the pitch, tiltable downwards, equipped with a ballast base with wheels (ballast excluded).
T780/1
Tennis facility for outdoor, in painted steel tube, round section mm. 102, complete with ground sleeves and brass tensioners.
F740/5
Pair of football nets, in nylon polyamide braid diam. mm. 3,5, hexagonal mesh, English model, dimensions cm. 750x250h, high side cm. 200-low side cm. 200.
F756/C
Set of 4 counterweights for transportable football/futsal goals, made of zinced steel diam.mm.100, to be attach. Ability to ballast up to kg.30 per counterweight
V703/TR
Monotubolar volleyball facility consisting of 2 main uprights in galvanized steel tubing diam. mm. 100, adjustment of the net by means of periscope slides in galvanized steel diam. mm. 108 and tension of the same by means of a ratchet winch. The volleyball facility is complete with gorund sleeves buried for a depth of cm. 42 with diam. external mm. 108 and specific hole covers in galvanized steel. Volleyball facility TÜV tested in according to UNI EN 1271
F744
Football field marker trolley in galvanized steel, capacity 30 l with rubber wheels and with front indicator wheel for marking the field lines. Practical and light accessory for accurately tracing the lines of football fields.
F756
Pair of transportable futsal goals, painted tubular steel structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 300x200. Without nets.Futsal goals certified according to UNI EN 749.
A492
Box for pole vaulting, shaped structure in hot-dip galvanized sheet metal. Regulatory measures.
F756/3
Pair of mini football goals in painted steel diam. mm. 80, measures cm. 170x105, complete with with back net supports diam. mm. 30. Upper depth cm. 50 and at the base depth cm. 80. Without nets.
F749/2
Slalom training pole for football. In plastic, height 170 cm, diameter 30 mm, equipped with a steel ferrule without plate.
V723/1
Foldable barrier balls with nylon bag, in galvanised steel frame, can be completely disassembled and folded, transportable on wheels. Measures cm. 65 x 45 x 50 h.
V723/MA
Wall simulator with irregular surface panel for training in attack and defense in volleyball. It causes the ball to bounce at unpredictable angles. Didactic and preparatory tool for the correction and improvement of the attack and coverage of the attack. Adjustable in height up to 370 cm, swiveling towards the inside or outside of the pitch, tiltable downwards, equipped with a ballast base with wheels (ballast not included. This simulator is equipped with a ball-catcher for the exercises of reception and precision, and, in addition, a ball carrier for balls.
T781
Tennis facility, painted steel structure that can be anchored to the floor, complete with brass tensioners and with screw connections.
F741
Pair of nets for football goals in polyethylene, dim. 3 mm, 12x12 cm square mesh, knot work, for regular football goals. Dimensions 750x250h cm, high side 100 cm-low side 200 cm.
F736/R
Set of 5 single shapes wit 2 metal push rods joint can be used directly into the ground , on a special trolley for 5 dummies (art.F736/1) or single trolley used for synthetic grass (art.F736/C), use for barrier and slalom, adjustable from 175 cm to 200 cm.
V704/T
Wall volleyball facility consisting of 2 uprights in galvanized steel tubing section mm. 50, sliders for adjusting the net Ø mm. 56, net tensioning system with ratchet winch, manual net height locking.
T781/1
Tennis facility in painted aluminum, ovoid section mm.120x105, complete with ground sleeves and brass tensioners.
F756/B
Pair of futsal goals with ground sleeves, painted tubular steel structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 300x200. Without nets.Futsal goals certified according to UNI EN 749.
F749/3
Pole for slalom and dribbling exercises. Ideal for football training in gyms and indoor sports facilities. Plastic rod, total height of cm. 160, plastic half-moon base.
V723/XN
Base in painted steel with wheels, large support surface, great stability, completely disasembled suitable for articles V723/A, V723/B, V723/C, V723/D.
T781/2
Transportable tennis facility, painted steel frame transportable on wheels, complete with brass tensioners. Ballast excluded.
F742
Pair of nets for football goals, in nylon polyamide braid diam. mm. 3,5, hexagonal mesh, dimensions cm. 750x250h, high side cm. 100-low side cm. 200.
F731
Pair of football goals with ground sleeves dimensions 6.00x2.00 H m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without lifting device article F731/3 and nets.
V708/M
Monotubular minivolley-superminivolley facility, transportable on wheels complete with galvanized slide tubes for adjusting the height of the bed base, minivolley cm. 210, superminivolley cm. 215.
F744/N
Spray soccer field marker trolley, for ecological paint, plastic tank, galvanized steel frame, rubber wheels. Handy and light suitable for pulling the lines of the football field.
F757
Pair of transportable futsal goals, painted tubular aluminium structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 300x200. Without nets. Futsal goals certified according to UNI EN 749.
T790
Referee chair for tennis game, painted steel structure, large support base, complete with fold-down written board on the side, plastic seat. Completely disassembled
F757/B
Pair of futsal goals with ground sleeves, painted tubular aluminium structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 300x200. Without nets. Futsal goals certified according to UNI EN 749.
F749/F
Set of numbers for player substitution. Numbers from 1 to 30. Double, plasticized, with hand grip, yellow color.
V726
Manual scorekeeper, rotating pole in painted steel, 4 numbers that can be changed at once. Meteore model.
V707
Volleyball umpire competition built according to FIPAV regulation, structure in painted steel, base with high stability measures cm. 120 x 80 with adjustable feet, walking surface in painted sheet metal, adjustable platform in various heights from cm. 110 to cm. 150 by means of manual rack and pinion winch, tubular sliding in galvanized steel section 80 x 80, railing in round tubular diam. mm. 40, side access ladder covered in non-slip material, PVC seat, complete with rubber transport wheels applied directly.
M990/1
Pair of rugby goals in regulation size, in painted aluminum round section, complete with ground sleeves. Height outside ground on request.
F742/4
Pair of nets for football goals, in polyethylene dim. mm. 6, square mesh 10x10 cm, knotless, dimensions cm. 750x250h, high side cm. 100-low side cm. 200.
F731/1
Pair of transportable football goals dimensions 6.00x2.00 H m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm,back basement on the ground depth cm. 150, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without nets.
V708/R
Volleyball facility, composed by 2 aluminium uprights, ovoid section mm. 120 x 100 internally reinforced. Adjustable net in different heights by periscopic sliding system in zinc-coated steel. Rack winch for stretching the net. Provided with ground sleeves.Volleyball facility TÜV tested in according to UNI EN 1271.
V704/P
Padded protection for volleyball facility V704/T, in foam rubber covered in coloured PVC, with velcro closure.
F757/1
Pair of transportable futsal goals, painted tubular steel structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 400x200. Without nets.
T792
Plastic pinstripe line tape for outdoor tennis court lines, heavy type, white colour, width cm. 4,5. Package mt. 150.
A497
Landing area for pole vaulting, in full and empty differentiated density foam rubber, covered in PVC and anti-tear net in the upper part. Complete with wear mat thickness cm. 10 incorporated in the fall area, including a PVC rain cover. Falling area measures for athletics cm. 500x500x80H, slides of cm. 150/200/250/300.
F757/1B
Pair of futsal goals with ground sleeves, painted tubular steel structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 400x200. Without nets.
V726/3
Manual scorekeeper, base in painted steel, rotating post, with 4 easy to read numerals on both sides.
V712/Q
Tape for beach volley court boundary lines, complete with galvanized stakes and elastics, for regular beach-volley court
T783/1
Tennis net Super Torneo, braided network of high tenacity polyethylene diam.mm3, UV-stabilized, heat-set in an autoclave, water repellent, knot working mm.42x42 black shirt, the top six double mesh reinforcement, fixed with double stitching the white band in high tenacity polyester and mm.50 diam.mm.5 galvanized steel cable, two loops on the ends to draw the network center polyester mesh with steel buckle and hook included.
A535
Starting block for competition made entirely of aluminum with longitudinal adjustment and aluminum sheet shoes with adjustable inclination, with synthetic rubber coating. Approved W.A.
A601/1
Reduction ring to convert discus to hammer platform, in in painted wood. External diameter cm.125, internal diameter cm.107
U1004
Unihoc basic set (up to 13/14 years) total length bat 95 cm, 6 bat red blade clubs + 6 bat yellow blade clubs + 6 balls
A490
Uprights for pole vaulting made of reinforced aluminum diameter 140 x 60 mm with height adjustment movement by means of a telescopic system with locking by means of a knob aluminum rod support rail made of steel with sliding of the trolley by means of nylon wheels graduated from cm. 0 to c.80. height adjustment from cm. 300 to 640. Approved W.A.
T785
Central tape strap for tennis net, in polyester white colour, width mm. 50, complete with hook and steel buckle.
A638
Javelin throwing circle, in varnished steel, can be install into the ground. Measures: lenght m. 6, height cm. 7.
T780
Tennis facility for outdoor, in painted steel tube, square section mm. 80 x 80, complete with ground sleeves and brass tensioners.
A568
Shot put for competition in turned and calibrated iron diameter 108 mm; Weight kg.3. Approved W.A.
V713/S
Beach-volley net, with colored band, heavy model, according to regulations. Length 8.5 m, height 1 m, mesh 10x10 cm.
U1005
Unihoc advanced set (over 13 years) total length bat 110 cm, 6 bat green blade clubs + 6 bat yellow blade clubs + 6 balls
A492
Box for pole vaulting, shaped structure in hot-dip galvanized sheet metal. Regulatory measures.
T780/1
Tennis facility for outdoor, in painted steel tube, round section mm. 102, complete with ground sleeves and brass tensioners.
V730/NR
Padded protection for volleyball facility V 708/R,V703/T and V703/TR, in foam rubber and velcro closure.
A569
Shot put for competition in turned and calibrated iron diameter 103 mm; Weight kg.4. Approved W.A.
V713/T
Beach-volley net Extra, with coloured professional band, measures according to regulations. Length 8.5 m, height 1 m, mesh 10x10 cm.
T781
Tennis facility, painted steel structure that can be anchored to the floor, complete with brass tensioners and with screw connections.
V709
Beach volleyball facility in aluminium, internally reinforced, section ovoid 120x100 cm. adjustment of the net in various heights with periscope sliding inside the upright, complete with cables, elongated bosses for anchoring to the ground, with tensioning winch. Official beach volleyball Italian stage
A569/1
Shot put for competition in turned and calibrated iron diameter 115 mm; Weight kg.5. Approved W.A.
V716/B
Beach volleyball umpire stand in hot zinced steel, ovoid section 60 x 30 mm., rear access ladder covered in non-slip material, protective railing in tubular diam. 30 mm., Walking surface in sheet metal, safety spacer,foldable, measures cm. 50 x 75 height cm. 130. Ground support feet widened to give greater stability
A494/1
Limit crossbar for the high jump in fiber of verto length cm. 400; yellow color for perfect visibility in any light condition. Approved W.A.
T781/2
Transportable tennis facility, painted steel frame transportable on wheels, complete with brass tensioners. Ballast excluded.
V709/2
Beach volleyball facility in steel tube diam. 50 mm, polyvalent basic model for sand and grass fields, equipped with ground sleeves with sliding net connections, galvanized pegs with adjustable tie rods.
A569/2
Shot put for competition in turned and calibrated iron diameter 120 mm; Weight kg.6. Approved W.A.
T790
Referee chair for tennis game, painted steel structure, large support base, complete with fold-down written board on the side, plastic seat. Completely disassembled
V709/3
Beach volleyball facility in aluminum, round section 80 mm, net height adjustment by means of telescopic slides, net tensioning with rack and pinion winch, complete with cables and elongated ground sleeves for anchoring to the ground.
A569/3
Shot put for competition in turned and calibrated iron diameter 125 mm; Weight kg.7,260. Approved W.A.
A529
Starting block ambidextrous adjustable with three blocks, in shaped wood, support surface covered with synthetic material.
A497
Landing area for pole vaulting, in full and empty differentiated density foam rubber, covered in PVC and anti-tear net in the upper part. Complete with wear mat thickness cm. 10 incorporated in the fall area, including a PVC rain cover. Falling area measures for athletics cm. 500x500x80H, slides of cm. 150/200/250/300.
T792
Plastic pinstripe line tape for outdoor tennis court lines, heavy type, white colour, width cm. 4,5. Package mt. 150.
A620
Discus throwing circle, structure in zinced steel. Internal diam. cm 250, regular measures, in-ground installation, cm 2 higher than the tread surface.
V709/B
Beach volleyball facility for free time, galvanized, completely demountable, equipped with galvanized pickets and tie rods, net not included.
A532
Starting block ambidextrous adjustable with two blocks, in shaped wood, support surface covered with synthetic material.
V731/C
Badminton facility competition model, reinforced monotubular, in painted steel, transportable with ballast.
V709/R
Beach-volley / tennis facility in steel tube with poles diam. 50 mm, height-adjustable net, equipped with 2 ground sleeves to sanding 1.5 m , pickets with tension-adjustable tie rods
T783/2
Minitennis net, in polyethylene high tenacity net, braid Ø 3 mm, manufactured without knot, mesh 40x40 mm black colour. Upper part with polyester high tenacity band 50 mm, white color, double sewing and polyester rope Ø 6 mm, white colour. Dimensions m. 7x0,75H
A533
Starting block ambidextrous adjustable with two blocks, in shaped wood, support surface covered with synthetic material, with transverse plate for starting from the bottom of the gym.
F735/B
Pair of transportable beach-soccer goals, dimensions 5.50x2.20h m, made of aluminium profiles ovoid section 120x100 mm reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, rear base depth 150 cm and upper net support elbows in zinced steel Ø 40 mm. complete with nylon hooks, anti breakage, assembly screws in class 8.8. Without nets.
V709/T
Beach volleyball / tennis facilities in steel tube Ø 70 mm, complete with slides for adjusting the net Ø 76 mm, ratchet winch, cables and gorund sleeves for anchoring to the ground.
A585
Shot put throwing platform in hot zinced steel, internal diam. cm 213,5, height cm 7, in-ground installation, cm 2 higher than the tread surface.
T782
Tennis net, woven polyethylene cord, Ø mm 3,5, with 6 reinforced meshes along all the length, with cable bushing in fabric and tension cable in steel Ø mm. 5. Complete with centre strap with hook and steel buckle. Regular size: length mt. 12,80, height mt. 1. Mesh cm. 4,2 x 4,2.
T797/2
Tennis court separation net, medium type windbreak for bottom tennis field, stabilized against ultra violet rays, perimeter eyeleted every 50 centimeters, density 90%, gr. 125 m2, green color, m. 18 x 2.
T781/1
Tennis facility in painted aluminum, ovoid section mm.120x105, complete with ground sleeves and brass tensioners.
A586/1
Shot put toe-board, made with a load-bearing structure in hot zinced and varnishing steel, with an upper element in fiberglass thickness mm. 20, replaceable in case of breakage. Suitable for competitions. Approved W.A.
T783
Tennis net, Torneo model, woven polyethylene cord, Ø mm 3,5,working with knot, with 6 reinforced meshes along the length, complete with polyester cable bushing, double stitching and side reinforcement with passing band. Tension cable in steel Ø mm. 5, complete with centre strap with hook and steel buckle. Regular size: length mt. 12,80, height mt. 1. Mesh cm. 4,2 x 4,2.
F740/S
Set of marking tapes for beach soccer fields consisting of two 37 m tapes, 80 mm wide, with eyelets on the ends and two 28 m tapes, 80 mm wide, with eyelets on the ends.
T797/3
Tennis court separation net, extra heavy type windbreak for bottom tennis field, stabilized against ultra violet rays, perimeter eyeleted every 50 centimeters, density 90%, gr. 180 m2, green color, m. 18 x 2.