Drill for sand perforation

V1001
Drill for sand perforation for beach volley game

Request Information
Related products for Beachvolley
View all products

V709

Beach volleyball facility in aluminium, internally reinforced, section ovoid 120x100 cm. adjustment of the net in various heights with periscope sliding inside the upright, complete with cables, elongated bosses for anchoring to the ground, with tensioning winch. Official beach volleyball Italian stage
+
+

V709/2

Beach volleyball facility in steel tube diam. 50 mm, polyvalent basic model for sand and grass fields, equipped with ground sleeves with sliding net connections, galvanized pegs with adjustable tie rods.
+
+

V709/3

Beach volleyball facility in aluminum, round section 80 mm, net height adjustment by means of telescopic slides, net tensioning with rack and pinion winch, complete with cables and elongated ground sleeves for anchoring to the ground.
+
+

V709/B

Beach volleyball facility for free time, galvanized, completely demountable, equipped with galvanized pickets and tie rods, net not included.
+
+

V709/R

Beach-volley / tennis facility in steel tube with poles diam. 50 mm, height-adjustable net, equipped with 2 ground sleeves to sanding 1.5 m , pickets with tension-adjustable tie rods
+
+

V709/T

Beach volleyball / tennis facilities in steel tube Ø 70 mm, complete with slides for adjusting the net Ø 76 mm, ratchet winch, cables and gorund sleeves for anchoring to the ground.
+
+

V730/NR

Padded protection for volleyball facility V 708/R,V703/T and V703/TR, in foam rubber and velcro closure.
+
+

V716/B

Beach volleyball umpire stand in hot zinced steel, ovoid section 60 x 30 mm., rear access ladder covered in non-slip material, protective railing in tubular diam. 30 mm., Walking surface in sheet metal, safety spacer,foldable, measures cm. 50 x 75 height cm. 130. Ground support feet widened to give greater stability
+
+

V716/P

Padded protection in expanded heliocel, covered with PVC for the high chair V716 and V716/B.
+
+

V712/Q

Tape for beach volley court boundary lines, complete with galvanized stakes and elastics, for regular beach-volley court
+
+

V726/1

Manual table scoreboard, with 4 reading blocks.
+
+

V713/R

Beach-tennis net, mesh 45 x 45 cm, also used to bench tennis games.
+
+

V713/S

Beach-volley net, with colored band, heavy model, according to regulations. Length 8.5 m, height 1 m, mesh 10x10 cm.
+
+

V713/T

Beach-volley net Extra, with coloured professional band, measures according to regulations. Length 8.5 m, height 1 m, mesh 10x10 cm.
+
+

V728/N

Beach-volley ball in sinthetic leather, Molten BEACH-22, coloured
+
+

V728/Q

Beach-volley ball in sinthetic leather PU, Molten "V5B5000", according to F.I.V.B.
+
+
View all products
Ideas for Outdoor facility
View all products

V709/B

Beach volleyball facility for free time, galvanized, completely demountable, equipped with galvanized pickets and tie rods, net not included.
+
+

A620

Discus throwing circle, structure in zinced steel. Internal diam. cm 250, regular measures, in-ground installation, cm 2 higher than the tread surface.
+
+

V731/C

Badminton facility competition model, reinforced monotubular, in painted steel, transportable with ballast.
+
+

T783/2

Minitennis net, in polyethylene high tenacity net, braid Ø 3 mm, manufactured without knot, mesh 40x40 mm black colour. Upper part with polyester high tenacity band 50 mm, white color, double sewing and polyester rope Ø 6 mm, white colour. Dimensions m. 7x0,75H
+
+

V728/N

Beach-volley ball in sinthetic leather, Molten BEACH-22, coloured
+
+

A500

Pole vault pole, customized according to the weight of the athlete.
+
+

A532

Starting block ambidextrous adjustable with two blocks, in shaped wood, support surface covered with synthetic material.
+
+

T797

Green net for fencing, made in polyethylene, Ø mm. 3, mesh cm. 4.5 x 4.5.
+
+

V709/R

Beach-volley / tennis facility in steel tube with poles diam. 50 mm, height-adjustable net, equipped with 2 ground sleeves to sanding 1.5 m , pickets with tension-adjustable tie rods
+
+

V731/P

Packaging of 12 badminton shuttlecocks.
+
+

A580

Shot put rack in painted steel tubing.
+
+

T780/2

Pair of posts for single game, painted steel structure.
+
+

T782

Tennis net, woven polyethylene cord, Ø mm 3,5, with 6 reinforced meshes along all the length, with cable bushing in fabric and tension cable in steel Ø mm. 5. Complete with centre strap with hook and steel buckle. Regular size: length mt. 12,80, height mt. 1. Mesh cm. 4,2 x 4,2.
+
+

F735/B

Pair of transportable beach-soccer goals, dimensions 5.50x2.20h m, made of aluminium profiles ovoid section 120x100 mm reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, rear base depth 150 cm and upper net support elbows in zinced steel Ø 40 mm. complete with nylon hooks, anti breakage, assembly screws in class 8.8. Without nets.
+
+

A533

Starting block ambidextrous adjustable with two blocks, in shaped wood, support surface covered with synthetic material, with transverse plate for starting from the bottom of the gym.
+
+

T797/2

Tennis court separation net, medium type windbreak for bottom tennis field, stabilized against ultra violet rays, perimeter eyeleted every 50 centimeters, density 90%, gr. 125 m2, green color, m. 18 x 2.
+
+

V709/T

Beach volleyball / tennis facilities in steel tube Ø 70 mm, complete with slides for adjusting the net Ø 76 mm, ratchet winch, cables and gorund sleeves for anchoring to the ground.
+
+

V731/R

Badminton racket in alluminium-graphite.
+
+

A585

Shot put throwing platform in hot zinced steel, internal diam. cm 213,5, height cm 7, in-ground installation, cm 2 higher than the tread surface.
+
+

T781/1

Tennis facility in painted aluminum, ovoid section mm.120x105, complete with ground sleeves and brass tensioners.
+
+

T783

Tennis net, Torneo model, woven polyethylene cord, Ø mm 3,5,working with knot, with 6 reinforced meshes along the length, complete with polyester cable bushing, double stitching and side reinforcement with passing band. Tension cable in steel Ø mm. 5, complete with centre strap with hook and steel buckle. Regular size: length mt. 12,80, height mt. 1. Mesh cm. 4,2 x 4,2.
+
+

F740/B

Pair of nets for beach soccer goals, in nylon, dimensions 550 x 220 cm.
+
+

A533/1

Starting block in non-slip rubber for indoor use in the gym.
+
+

T797/3

Tennis court separation net, extra heavy type windbreak for bottom tennis field, stabilized against ultra violet rays, perimeter eyeleted every 50 centimeters, density 90%, gr. 180 m2, green color, m. 18 x 2.
+
+

V712/Q

Tape for beach volley court boundary lines, complete with galvanized stakes and elastics, for regular beach-volley court
+
+

A586/2

Shot put toe-board in fibreglass. Approved W.A.
+
+

A586/1

Shot put toe-board, made with a load-bearing structure in hot zinced and varnishing steel, with an upper element in fiberglass thickness mm. 20, replaceable in case of breakage. Suitable for competitions. Approved W.A.
+
+

T796

Bench for tennis court, structure in hot zinced steel and plastic plank, lenght m.2
+
+

T783/1

Tennis net Super Torneo, braided network of high tenacity polyethylene diam.mm3, UV-stabilized, heat-set in an autoclave, water repellent, knot working mm.42x42 black shirt, the top six double mesh reinforcement, fixed with double stitching the white band in high tenacity polyester and mm.50 diam.mm.5 galvanized steel cable, two loops on the ends to draw the network center polyester mesh with steel buckle and hook included.
+
+

F740/S

Set of marking tapes for beach soccer fields consisting of two 37 m tapes, 80 mm wide, with eyelets on the ends and two 28 m tapes, 80 mm wide, with eyelets on the ends.
+
+

V713/R

Beach-tennis net, mesh 45 x 45 cm, also used to bench tennis games.
+
+

A597

Transportable hammer rack, in painted steel.
+
+

A567

Shot put for competition in turned and calibrated iron diameter 80 mm; Weight kg.2
+
+

A586/A

Shot put toe-board stop made of wood
+
+

U1004

Unihoc basic set (up to 13/14 years) total length bat 95 cm, 6 bat red blade clubs + 6 bat yellow blade clubs + 6 balls
+
+

T785

Central tape strap for tennis net, in polyester white colour, width mm. 50, complete with hook and steel buckle.
+
+

K1206

Packaging of 3 sponge balls, diameter 70 mm.
+
+

A535

Starting block for competition made entirely of aluminum with longitudinal adjustment and aluminum sheet shoes with adjustable inclination, with synthetic rubber coating. Approved W.A.
+
+

T780

Tennis facility for outdoor, in painted steel tube, square section mm. 80 x 80, complete with ground sleeves and brass tensioners.
+
+

V713/S

Beach-volley net, with colored band, heavy model, according to regulations. Length 8.5 m, height 1 m, mesh 10x10 cm.
+
+

A601/1

Reduction ring to convert discus to hammer platform, in in painted wood. External diameter cm.125, internal diameter cm.107
+
+

A568

Shot put for competition in turned and calibrated iron diameter 108 mm; Weight kg.3. Approved W.A.
+
+

A490

Uprights for pole vaulting made of reinforced aluminum diameter 140 x 60 mm with height adjustment movement by means of a telescopic system with locking by means of a knob aluminum rod support rail made of steel with sliding of the trolley by means of nylon wheels graduated from cm. 0 to c.80. height adjustment from cm. 300 to 640. Approved W.A.
+
+

U1005

Unihoc advanced set (over 13 years) total length bat 110 cm, 6 bat green blade clubs + 6 bat yellow blade clubs + 6 balls
+
+

T785/B

Brass winch, round section, for tennis facility.
+
+

V726/1

Manual table scoreboard, with 4 reading blocks.
+
+

A638

Javelin throwing circle, in varnished steel, can be install into the ground. Measures: lenght m. 6, height cm. 7.
+
+

T780/1

Tennis facility for outdoor, in painted steel tube, round section mm. 102, complete with ground sleeves and brass tensioners.
+
+

V713/T

Beach-volley net Extra, with coloured professional band, measures according to regulations. Length 8.5 m, height 1 m, mesh 10x10 cm.
+
+

A569

Shot put for competition in turned and calibrated iron diameter 103 mm; Weight kg.4. Approved W.A.
+
+

A492

Box for pole vaulting, shaped structure in hot-dip galvanized sheet metal. Regulatory measures.
+
+

V730/NR

Padded protection for volleyball facility V 708/R,V703/T and V703/TR, in foam rubber and velcro closure.
+
+

T781

Tennis facility, painted steel structure that can be anchored to the floor, complete with brass tensioners and with screw connections.
+
+

V716/B

Beach volleyball umpire stand in hot zinced steel, ovoid section 60 x 30 mm., rear access ladder covered in non-slip material, protective railing in tubular diam. 30 mm., Walking surface in sheet metal, safety spacer,foldable, measures cm. 50 x 75 height cm. 130. Ground support feet widened to give greater stability
+
+

A569/1

Shot put for competition in turned and calibrated iron diameter 115 mm; Weight kg.5. Approved W.A.
+
+

A492/1

Fiberglass vault box for vaulting pole, measures according to rules.
+
+

T787

Replacement tape for tennis net upper band, in polyester.
+
+

V709

Beach volleyball facility in aluminium, internally reinforced, section ovoid 120x100 cm. adjustment of the net in various heights with periscope sliding inside the upright, complete with cables, elongated bosses for anchoring to the ground, with tensioning winch. Official beach volleyball Italian stage
+
+

T781/2

Transportable tennis facility, painted steel frame transportable on wheels, complete with brass tensioners. Ballast excluded.
+
+

A569/2

Shot put for competition in turned and calibrated iron diameter 120 mm; Weight kg.6. Approved W.A.
+
+

V728/Q

Beach-volley ball in sinthetic leather PU, Molten "V5B5000", according to F.I.V.B.
+
+

A494/1

Limit crossbar for the high jump in fiber of verto length cm. 400; yellow color for perfect visibility in any light condition. Approved W.A.
+
+

T790

Referee chair for tennis game, painted steel structure, large support base, complete with fold-down written board on the side, plastic seat. Completely disassembled
+
+

V709/2

Beach volleyball facility in steel tube diam. 50 mm, polyvalent basic model for sand and grass fields, equipped with ground sleeves with sliding net connections, galvanized pegs with adjustable tie rods.
+
+

A618/1

Soft rubber disc, diameter cm. 22, weight 2 kg.
+
+

V713/B

Net for badminton facility, in nylon, length mt. 6,1.
+
+

A569/3

Shot put for competition in turned and calibrated iron diameter 125 mm; Weight kg.7,260. Approved W.A.
+
+

A537

Relay baton in coloured aluminium, regular size.
+
+

T792

Plastic pinstripe line tape for outdoor tennis court lines, heavy type, white colour, width cm. 4,5. Package mt. 150.
+
+

V709/3

Beach volleyball facility in aluminum, round section 80 mm, net height adjustment by means of telescopic slides, net tensioning with rack and pinion winch, complete with cables and elongated ground sleeves for anchoring to the ground.
+
+

A619

Trasportable discus rack, in painted steel.
+
+

V731

Badminton facility basic model, reinforced monotubular, in painted steel, transportable.
+
+

F755/B

Beach-soccer ball in TPU-SOFT TOUCH , size 5
+
+

A497

Landing area for pole vaulting, in full and empty differentiated density foam rubber, covered in PVC and anti-tear net in the upper part. Complete with wear mat thickness cm. 10 incorporated in the fall area, including a PVC rain cover. Falling area measures for athletics cm. 500x500x80H, slides of cm. 150/200/250/300.
+
+

A529

Starting block ambidextrous adjustable with three blocks, in shaped wood, support surface covered with synthetic material.
+
+

T794

Drag mat in coconut, cm. 200 x 120.
+
+
View all products