Name: Volleyball scoreboard with rotating pole Meteore model
Brand: Artisport
SKU: V726

A492

Box for pole vaulting, shaped structure in hot-dip galvanized sheet metal. Regulatory measures.

F756/3

Pair of mini football goals in painted steel diam. mm. 80, measures cm. 170x105, complete with with back net supports diam. mm. 30. Upper depth cm. 50 and at the base depth cm. 80. Without nets.

F749/1

Set of numbers for player substitution. Numbers from 1 to 30. Double, plasticized, without hand grip, yellow color.

T802

Pair of paddle facility protection in rubber foam cm.5, with covering in PVC, velcro closing

T781

Tennis facility, painted steel structure that can be anchored to the floor, complete with brass tensioners and with screw connections.

F740/5

Pair of football nets, in nylon polyamide braid diam. mm. 3,5, hexagonal mesh, English model, dimensions cm. 750x250h, high side cm. 200-low side cm. 200.

Set of 5 single shapes wit 2 metal push rods joint can be used directly into the ground , on a special trolley for 5 dummies (art.F736/1) or single trolley used for synthetic grass (art.F736/C), use for barrier and slalom, adjustable from 175 cm to 200 cm.

V723/MA

Wall simulator with irregular surface panel for training in attack and defense in volleyball. It causes the ball to bounce at unpredictable angles. Didactic and preparatory tool for the correction and improvement of the attack and coverage of the attack. Adjustable in height up to 370 cm, swiveling towards the inside or outside of the pitch, tiltable downwards, equipped with a ballast base with wheels (ballast not included. This simulator is equipped with a ball-catcher for the exercises of reception and precision, and, in addition, a ball carrier for balls.

V704/T

Wall volleyball facility consisting of 2 uprights in galvanized steel tubing section mm. 50, sliders for adjusting the net Ø mm. 56, net tensioning system with ratchet winch, manual net height locking.

K1221

Football-tennis kit, indoor/outside use, complete 1 net, supports with plastic base.

F744

Football field marker trolley in galvanized steel, capacity 30 l with rubber wheels and with front indicator wheel for marking the field lines. Practical and light accessory for accurately tracing the lines of football fields.

T781/1

Tennis facility in painted aluminum, ovoid section mm.120x105, complete with ground sleeves and brass tensioners.

F756

Pair of transportable futsal goals, painted tubular steel structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 300x200. Without nets.Futsal goals certified according to UNI EN 749.

T787

Replacement tape for tennis net upper band, in polyester.

A492/1

Fiberglass vault box for vaulting pole, measures according to rules.

F756/4

Nets for mini football goals article F756/3

F749/2

Slalom training pole for football. In plastic, height 170 cm, diameter 30 mm, equipped with a steel ferrule without plate.

V723/1

Foldable barrier balls with nylon bag, in galvanised steel frame, can be completely disassembled and folded, transportable on wheels. Measures cm. 65 x 45 x 50 h.

T781/2

Transportable tennis facility, painted steel frame transportable on wheels, complete with brass tensioners. Ballast excluded.

F741

Pair of nets for football goals in polyethylene, dim. 3 mm, 12x12 cm square mesh, knot work, for regular football goals. Dimensions 750x250h cm, high side 100 cm-low side 200 cm.

F736/C

Single trolley for shape F736/R, ideal for synthetic grass.

V723/XN

Base in painted steel with wheels, large support surface, great stability, completely disasembled suitable for articles V723/A, V723/B, V723/C, V723/D.

V708/M

Monotubular minivolley-superminivolley facility, transportable on wheels complete with galvanized slide tubes for adjusting the height of the bed base, minivolley cm. 210, superminivolley cm. 215.

208060

nylon hook for football goal nets.

F744/1

Replacement brush for field marker trolley F 744.

T796

Bench for tennis court, structure in hot zinced steel and plastic plank, lenght m.2

F756/B

Pair of futsal goals with ground sleeves, painted tubular steel structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 300x200. Without nets.Futsal goals certified according to UNI EN 749.

T790

Referee chair for tennis game, painted steel structure, large support base, complete with fold-down written board on the side, plastic seat. Completely disassembled

A494/1

Limit crossbar for the high jump in fiber of verto length cm. 400; yellow color for perfect visibility in any light condition. Approved W.A.

F757/B

Pair of futsal goals with ground sleeves, painted tubular aluminium structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 300x200. Without nets. Futsal goals certified according to UNI EN 749.

F749/3

Pole for slalom and dribbling exercises. Ideal for football training in gyms and indoor sports facilities. Plastic rod, total height of cm. 160, plastic half-moon base.

V724

Set of wooden numbered paddles for players substitution, pack of 12 pieces.

M990/1

Pair of rugby goals in regulation size, in painted aluminum round section, complete with ground sleeves. Height outside ground on request.

F742

Pair of nets for football goals, in nylon polyamide braid diam. mm. 3,5, hexagonal mesh, dimensions cm. 750x250h, high side cm. 100-low side cm. 200.

K859/6

Glue for fixing wall and column protections.

F731

Pair of football goals with ground sleeves dimensions 6.00x2.00 H m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without lifting device article F731/3 and nets.

V707

Volleyball umpire competition built according to FIPAV regulation, structure in painted steel, base with high stability measures cm. 120 x 80 with adjustable feet, walking surface in painted sheet metal, adjustable platform in various heights from cm. 110 to cm. 150 by means of manual rack and pinion winch, tubular sliding in galvanized steel section 80 x 80, railing in round tubular diam. mm. 40, side access ladder covered in non-slip material, PVC seat, complete with rubber transport wheels applied directly.

V708/R

Volleyball facility, composed by 2 aluminium uprights, ovoid section mm. 120 x 100 internally reinforced. Adjustable net in different heights by periscopic sliding system in zinc-coated steel. Rack winch for stretching the net. Provided with ground sleeves.Volleyball facility TÜV tested in according to UNI EN 1271.

V704/P

Padded protection for volleyball facility V704/T, in foam rubber covered in coloured PVC, with velcro closure.

F744/N

Spray soccer field marker trolley, for ecological paint, plastic tank, galvanized steel frame, rubber wheels. Handy and light suitable for pulling the lines of the football field.

F749/I

Double agility speed ladder with joint clip for ladders connection, lenght 6 m.

F757

Pair of transportable futsal goals, painted tubular aluminium structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 300x200. Without nets. Futsal goals certified according to UNI EN 749.

T792

Plastic pinstripe line tape for outdoor tennis court lines, heavy type, white colour, width cm. 4,5. Package mt. 150.

F757/1B

Pair of futsal goals with ground sleeves, painted tubular steel structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 400x200. Without nets.

F749/F

Set of numbers for player substitution. Numbers from 1 to 30. Double, plasticized, with hand grip, yellow color.

V726/3

Manual scorekeeper, base in painted steel, rotating post, with 4 easy to read numerals on both sides.

M991

Rugby ball in rubber double layer ULTIMA 70.

F742/4

Pair of nets for football goals, in polyethylene dim. mm. 6, square mesh 10x10 cm, knotless, dimensions cm. 750x250h, high side cm. 100-low side cm. 200.

F745/3

Spray field marker trolley for ecological paints, in painted steel, equipped with electric battery pump, complete with battery charger, tank capacity Lt. 18, adjustable side marking.

F731/1

Pair of transportable football goals dimensions 6.00x2.00 H m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm,back basement on the ground depth cm. 150, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without nets.

V707/1

Volleyball umpire for standing or seated, built according to FIPAV regulation, structure in painted steel, high stability base measures cm. 110 x 70 with adjustable feet, walking surface in galvanized sheet metal, adjustable platform in various heights from cm. 110 to cm. 150 by manual rack and pinion winch, round tubular railing diam. mm. 40, rear access ladder covered in non-slip material, PVC seat, complete with rubber transport wheels.

V723/F

Volleyball ball with elastics, suitable for training, in blow rubber. To be used with art. V 723/B.

K807

Plastic bottle cage with 6 bottles of 1 L.

F745/1

Ecological paint for field marker trolley. Pack of 14

F746

Shoes washer composed of body and removable pianted steel support rails, n2 lower brushes with plastica holder and short , stiffnylon bristles for cleaning outsole, n.2 side brushes with plastic older and nylon , long and soft bristles for upper cleaning, spray system made of galvanized steel with 4 crossed water jets with adjustable angle.

F757/1

Pair of transportable futsal goals, painted tubular steel structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 400x200. Without nets.

T794

Drag mat in coconut, cm. 200 x 120.

A497

Landing area for pole vaulting, in full and empty differentiated density foam rubber, covered in PVC and anti-tear net in the upper part. Complete with wear mat thickness cm. 10 incorporated in the fall area, including a PVC rain cover. Falling area measures for athletics cm. 500x500x80H, slides of cm. 150/200/250/300.

F757/2B

Pair of futsal goals with ground sleeves, painted tubular aluminium structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 400x200. Without nets.

V726/4

Player subsitution and time out kit, complete with numbered paddles, wooden case and rechargeable batteries.

M991/1

Set of 4 protections for rugby goals, square section 35x35 cm, height 200 cm, thickness 11 cm, side velcro closure.

F742/5

Pair of nets for football goals, in nylon polyamide braid diam. mm. 6, extra hexagonal mesh, dimensions cm. 750x250h, high side cm. 100-low side cm. 200.

F731/5

Pair of football goals with ground sleeves dimensions 5.00x2.00 H m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without lifting device article F731/3 and nets. Football goals tested in according to UNI EN 748.

F731/2

Pair of device used for transporting football goals

V716

Volleyball umpire stand in painted steel ovoid section 60 x 30 mm., rear access ladder covered in non-slip material, protective railing in tubular diam. 30 mm., Walking surface in painted sheet metal, safety spacer, folding, measures cm. 50 x 75 height cm. 130.

V716/P

Padded protection in expanded heliocel, covered with PVC for the high chair V716 and V716/B.

K1220

Football-tennis kit, outdoor use, complete with net 9x1 m, supports with hooks and steel ferrule, with pickets.

F745/2

Spray soccer field marker trolley, for ecological paint, with rubber wheels and front indicator wheel. This stock accessory is equipped with a plastic pressure tank for ecological paint and complete with engine.

PLIFIX

package 25 plifix

F756/P

Set of n. 4 protections for futsal posts.

T797

Green net for fencing, made in polyethylene, Ø mm. 3, mesh cm. 4.5 x 4.5.

A500

Pole vault pole, customized according to the weight of the athlete.

T783/2

Minitennis net, in polyethylene high tenacity net, braid Ø 3 mm, manufactured without knot, mesh 40x40 mm black colour. Upper part with polyester high tenacity band 50 mm, white color, double sewing and polyester rope Ø 6 mm, white colour. Dimensions m. 7x0,75H

F749/P

Set of 48 space marker cones, in different colours, complete with cone holder.

K859/8

Eyelets for wall / column protections

V730/2

Padded protection for volleyball facility V708 and V700, foam rubber, covered in PVC and velcro closure.

F792

Benches for coaches / reserves model Serie A, structure in zinced tubular steel, modular and modular, expandable at any time, cover and sides in compact polycarbonate thickness mm. 3. Prepared for fixing to the ground or for transport by means of wheels, seats made of comfortable padded armchairs and covered in washable imitation leather and mounted on a base with wheels. The bench is equipped with protections in the upper front part. Dimensions and structure can be designed according to needs.

F756/R1

Pair of nets for article F756/2.

F731/15

Pair of transportable football goals dimensions 5.00x2.00 H m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm,back basement on the ground depth cm. 150, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without nets. Football goals tested in according to UNI EN 748.

F731/3

Pair of lifting device for football goals.

V700

Pair of volleyball facility model Tournament consisting of n. 2 main uprights in galvanized steel tubing diam. 70 cm., V-shaped ground base in painted steel plate, thickness mm. 8, steel tie rods 25 mm section painted with epoxy powders. Adjustment of the net by means of a special periscope slide that allows, if necessary, to lower the net to tennis height. Mains tension by means of a ratchet winch, screws for fixing to the floor.

T782

Tennis net, woven polyethylene cord, Ø mm 3,5, with 6 reinforced meshes along all the length, with cable bushing in fabric and tension cable in steel Ø mm. 5. Complete with centre strap with hook and steel buckle. Regular size: length mt. 12,80, height mt. 1. Mesh cm. 4,2 x 4,2.

F737/3

Set of 12 plastic hurdles, modular, fixed height 10-20-30-40-50-60 cm.

F746/S

Seat for coaches benches on football fields. Seat in plastic material.

BI-REBOUND

BI-REBOUND powder- coated iron frame cm.130x130, , with 1 side net mesch cm.10x10 and 1 side net mesh cm.5x5, adjustable inclination angle.

F757/2

Pair of transportable futsal goals, painted tubular aluminium structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 400x200. Without nets.

T797/2

Tennis court separation net, medium type windbreak for bottom tennis field, stabilized against ultra violet rays, perimeter eyeleted every 50 centimeters, density 90%, gr. 125 m2, green color, m. 18 x 2.

F852

HD polyethylene fencing net for football fields, 10x10 cm mesh, 3 mm braid, weight 60 g / m. Used in football and futsal fields to prevent the balls from leaking from the playing field, water-repellent and UV stabilized. Dimensions on request.

F749/Q

Coaching senior bibs

K859/9

"T" profiling finish for wall and column protection , lenght m.2

V723/A

Ball-catcher, for volleyball training on reception or to increase the accuracy of the setter by placing it in the area where you want the lift. Adjustable height from 190 cm to 320 cm with tiltable upper ring. Base not included.

F793

Benches for coaches / reserves model Serie A, structure in aluminium tubular steel, modular and modular, expandable at any time, cover and sides in compact polycarbonate thickness mm. 3. Prepared for fixing to the ground or for transport by means of wheels, seats made of comfortable padded armchairs and covered in washable imitation leather and mounted on a base with wheels. The bench is equipped with protections in the upper front part. Dimensions and structure can be designed according to needs.

F736/1

Trolley for kick wall , in zinced steel, for 5 single shapes, complete with wheels and handle for moving.

V708/C

Volleyball facility Category A1 competition certified for international competitions, light alloy structure with internal anti-deflection ribs, additional internal reinforcement in anti-deflection steel, completely retractable net adjustment slides. The facility for adjusting the height and tension of the net is started by means of a removable handle, upper pulley in nylon. Volleyball facility supplied complete with ground sleeves to be buried, height 50 cm. Volleyball facility TÜV tested in according to UNI EN 1271

F732

Pair of transportable football goals, dimensions 7.32x2.44h m, made of aluminium profiles ovoid section 120x100 mm reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, rear base depth 200 cm and upper net support elbows in zinced steel Ø 40 mm. complete with nylon hooks, anti breakage, assembly screws in class 8.8. without nets. Football goals tested in according to UNI EN 748.

V700/2

Pair of volleyball facility model Tournament consisting of n. 2 main uprights in galvanized steel tubing diam. 70 cm., V-shaped ground base in painted steel plate, thickness mm. 8, steel tie rods 25 mm section painted with epoxy powders. Adjustment of the net by means of a special periscope slide that allows, if necessary, to lower the net to tennis height. Mains tension by means of a ratchet winch. Support frame for housing ballast boxes (ballast to 125 kg each post not included).

T783

Tennis net, Torneo model, woven polyethylene cord, Ø mm 3,5,working with knot, with 6 reinforced meshes along the length, complete with polyester cable bushing, double stitching and side reinforcement with passing band. Tension cable in steel Ø mm. 5, complete with centre strap with hook and steel buckle. Regular size: length mt. 12,80, height mt. 1. Mesh cm. 4,2 x 4,2.

V707/1P

Padded protection in foam rubber covered in pvc for volleyball umpire stand article V707/1.

F748

Set of fixed corner posts for football composit by: n.4 fixed post diam. 30 mm, n.4 flags dim. 60x40 cm, n.4 clips, n.4 ground sleeves with cap. For regular fields.

F731/4P

Set of 4 protection for detached post for football goals, in PE with covering in PVC

F758

Pair of nylon braid nets for futsal goals, diameter mm. 3, knotless processing, dimensions cm. 300x200h, high side cm. 100-low side cm. 100, hexagonal mesh.

T797/3

Tennis court separation net, extra heavy type windbreak for bottom tennis field, stabilized against ultra violet rays, perimeter eyeleted every 50 centimeters, density 90%, gr. 180 m2, green color, m. 18 x 2.

F852/B

Perimeter reinforcement edging for fencing net for football fields, consisting of a rope of diam. 6 mm of the same material as the mesh.

K859/1

Wall protection made of high density polyethylene covered with colour pvc, thickness mm.22, scratchproof, no-toxic, fireproof class 1.Certificate in reference at UNI EN 913.

F755/1

Supporting poles with two reaches. Working arc for header, headwork tool for 2 players, in painted steel tubing, complete with ground sleeves.

V723/B

Spike essential for learning and correcting the fundamentals in volleyball: serve, block and attack. On sale excluding balloon and base.

F736/A

Set of 5 single shapes with 1 steel ferrule to be fixed only in the ground for barrier and slalom use, height adjustable from 150 cm to 190 cm.

F731/8

Pair of transportable football goals made of aluminium Ø 80 mm, dimensions 5.00x2.00 m, reinforced with internal anti-bending ribs; backside support structure in steel Ø 30 mm, complete with nylon hooks, anti breakage. Without nets

F735

Pair of football goals with ground sleeves dimensions 7,32x2,44h m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without lifting device article F731/3 and nets. Football goals tested in according to UNI EN 748.

T783/1

Tennis net Super Torneo, braided network of high tenacity polyethylene diam.mm3, UV-stabilized, heat-set in an autoclave, water repellent, knot working mm.42x42 black shirt, the top six double mesh reinforcement, fixed with double stitching the white band in high tenacity polyester and mm.50 diam.mm.5 galvanized steel cable, two loops on the ends to draw the network center polyester mesh with steel buckle and hook included.

202011

Ratchet to winch for volleyball facility with cm. 60 belt and hook.

F748/1

set of flexible corner posts for football, composed of: n.4 flexible posts diam. 30 mm, n.4 flags dimensions cm.60x40, n.4 clips, n.4 ground sleeves with cap. For regular fields.

T801

Paddle facility in according to regulations, in painted steel section mm. 80x80, complete with brass net tensioning winch and plate for fixing on the ground.

F758/1

Pair of nylon braid nets for soccer goals, diameter mm. 6, knotless processing, dimensions cm. 300x200h, high side cm. 100-low side cm. 100, hexagonal mesh.

F740/1

Pair of nets for reduced football goals, made of polypropylene diameter mm.3, without knot,dimensions cm.650x250 upper depth cm.100- lower depth cm. 150.

K859/3

Column protection made of high density polyethylene covered with colour pvc, thickness mm.22, scratchproof, no-toxic, fireproof class 1. Certificate in reference at UNI EN 913.

K806

Hand pump for soccer and volleyball balls.

V723/C

Telescopic jump tester for measuring the height of the jump; can be adjusted by cm. 230 to cm. 380; base not included.

202010

Volleyball accessories: net stretching winch, for our following volleyball systems: V700, V700/2,V703/T,V703/TR, V704/T,V708, V708/R

F737

Extendable and sliding tunnel for stadiums and football fields on wheels to protect players from entering the locker room and indoor and outdoor playing fields. Supporting structure in aluminum, hinges and connections in steel painted with polyurethane powders, coated fabric in fireproof class M2 PVC. Dimensions: width 2 m, total height 2.4 m. Other sizes on request.

F731/8B

Pair of football goals made of aluminium Ø 80 mm with ground sleeves, dimensions 5.00x2.00 m, reinforced with internal anti-bending ribs; backside support structure in steel Ø 30 mm, complete with nylon hooks, anti breakage. Without nets

F735/PS

Pair of football goals with ground sleeves dimensions 7,32x2,44h m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, detached posts in zinced steel Ø 48 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without lifting device article F731/3 and nets. Football goals tested in according to UNI EN 748.

V708

Volleyball facility model Gara transportable on wheels consisting of 2 uprights in aluminum ovoid section mm. 120 x 100 reinforced internally, adjustment of the net by means of periscope slides inside the structure, tensioning of the net by means of a rack and pinion winch, ground support base in steel sheet mm. 8 laser cut with fixing holes at center distance cm. 47, reinforcement rods Ø mm. 25. The facility is supplied complete with anchor bolts and concealed screws MA 14 for fixing. Volleyball facility TÜV tested in according to UNI EN 1271

T785

Central tape strap for tennis net, in polyester white colour, width mm. 50, complete with hook and steel buckle.

G389

Polyethylene mat, dimensions cm. 180 x 50 x 0.8 h.

F730

Pair of transportable football goals, dimensions 7.32x2.44 H. m, made of stable reinforced aluminum profiles, oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, nets supports in zinced steel diam. 40 mm, back basement on the ground depth m. 2 in aluminum in oval section 120x100 mm complete with guide for inserting hooks for perfect net tension. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without net. Football goals tested in according to UNI EN 748.

T800

Paddle net made of polyethylene HD yarns, stabilized UV rays, waterproof, thermo-fixed, knotless. On the upper side: heavy polyester band 100 mm fixed with double sewing and steel cable 12,50 m. Other sides finished with reinforcement and additional fixing rope. Completed with central band with hook and buckle.

K1206

Packaging of 3 sponge balls, diameter 70 mm.

T780

Tennis facility for outdoor, in painted steel tube, square section mm. 80 x 80, complete with ground sleeves and brass tensioners.

F740/15

Pair of nets for reduced football goals, made of polypropylene diameter mm.3, without knot,dimensions cm.500x200 upper depth cm.100- lower depth cm. 150.

K859/4

“L” profile for protection edges column, dimensions cm. 8x8x2 thick., height cm. 200

K815

Metal penny whistle with cord for soccer, indoor football and futsal referee.

V723/D

Spike with articulated and adjustable arms for volleyball and minivolley training, protected by soft safety polyurethane. With this tool it is possible to evaluate the way in which the ball is hit and the trajectory it takes. Base and balloon not included.

F737/2

Plastic hurdle for football training, support bases, graduated in height up to 100 cm

F758/0

Pair of nets for futsal goals in polyethylene braid, diameter 3 mm, UV stabilized, water-repellent, heat-set, knot-knot, mesh 12x12 cm, dimensions 300x200h cm.

F756/1

Mini football goals in plastic complete with net. Dimensions 160 x 110 cm.

V703/T

Monotubular volleyball system consisting of 2 main uprights in galvanized steel tubing diam. mm. 70 x 3, adjustment of the net by means of periscope slides in galvanized steel diam. mm. 76 and tension of the same by means of a ratchet winch. The volleyball facility is complete with ground sleeves to be buried for a depth of cm. 42 with diam. external mm. 76 and complete with covers in galvanized steel.

T785/B

Brass winch, round section, for tennis facility.

A490

Uprights for pole vaulting made of reinforced aluminum diameter 140 x 60 mm with height adjustment movement by means of a telescopic system with locking by means of a knob aluminum rod support rail made of steel with sliding of the trolley by means of nylon wheels graduated from cm. 0 to c.80. height adjustment from cm. 300 to 640. Approved W.A.

F730/1

Pair of transportable football goals, dimensions 6.00x2.00 m, made of stable reinforced aluminum profiles, oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, nets supports in zinced steel diam. 40 mm, back basement on the ground depth m. 2 in aluminum in oval section 120x100 mm complete with guide for inserting hooks for perfect net tension. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without nets. Football goals tested in according to UNI EN 748.

F749/0

Football scoreboard for players substitution. Handy model, double side. Numbers from 1 to 99, fluorescent yellow or orange.

F740/7

Pair of nets for football goals in HT polypropylene braid, mesh 110x100 mm Wire diameter Ø 6 mm, UV stabilized, heat set, water repellent. Knotless in a square knit, fully edged on the perimeter to ensure greater strength and durability. Complete with rope for hooking.

V715

Volleyball net spacers, painted steel tubing, with holes for two stretching cables.

T780/1

Tennis facility for outdoor, in painted steel tube, round section mm. 102, complete with ground sleeves and brass tensioners.

F740/2

Pair of nets for futsal goals m. 4x2, made of nylon braid diameter mm.3, without knot, upper depth cm.100- lower depth cm. 100.

F756/C

Set of 4 counterweights for transportable football/futsal goals, made of zinced steel diam.mm.100, to be attach. Ability to ballast up to kg.30 per counterweight

F746/4

Protection for coach bench in foam rubber, half moon shape, with covering in colored PVC with velcro for fixing.

V723/M

Wall simulator with irregular surface panel for training in attack and defense in volleyball. It causes the ball to bounce at unpredictable angles. Didactic and preparatory tool for the correction and improvement of the attack and coverage of the attack. Adjustable in height up to 370 cm, swiveling towards the inside or outside of the pitch, tiltable downwards, equipped with a ballast base with wheels (ballast excluded).

V703/TR

Monotubolar volleyball facility consisting of 2 main uprights in galvanized steel tubing diam. mm. 100, adjustment of the net by means of periscope slides in galvanized steel diam. mm. 108 and tension of the same by means of a ratchet winch. The volleyball facility is complete with gorund sleeves buried for a depth of cm. 42 with diam. external mm. 108 and specific hole covers in galvanized steel. Volleyball facility TÜV tested in according to UNI EN 1271

T780/2

Pair of posts for single game, painted steel structure.

F756/2

Pair of mini football goals, in painted steel Ø mm 40. Dimensions 150 x 110 cm. Without nets.

Volleyball scoreboard with rotating pole Meteore model

Accessories for Volleyball

Ideas for Playgrounds