Sport
Basketball
Football - Soccer
5-a-side football - Minisoccer
Beach soccer
Handball
Volleyball
Umpire stand
V707
Volleyball umpire competition built according to FIPAV regulation, structure in painted steel, base with high stability measures cm. 120 x 80 with adjustable feet, walking surface in painted sheet metal, adjustable platform in various heights from cm. 110 to cm. 150 by means of manual rack and pinion winch, tubular sliding in galvanized steel section 80 x 80, railing in round tubular diam. mm. 40, side access ladder covered in non-slip material, PVC seat, complete with rubber transport wheels applied directly.
Accessories for Volleyball
V723/1
Foldable barrier balls with nylon bag, in galvanised steel frame, can be completely disassembled and folded, transportable on wheels. Measures cm. 65 x 45 x 50 h.
V726
Manual scorekeeper, rotating pole in painted steel, 4 numbers that can be changed at once. Meteore model.
V726/3
Manual scorekeeper, base in painted steel, rotating post, with 4 easy to read numerals on both sides.
V726/4
Player subsitution and time out kit, complete with numbered paddles, wooden case and rechargeable batteries.
202010
Volleyball accessories: net stretching winch, for our following volleyball systems: V700, V700/2,V703/T,V703/TR, V704/T,V708, V708/R
Related products for Volleyball facilities
V708/R
Volleyball facility, composed by 2 aluminium uprights, ovoid section mm. 120 x 100 internally reinforced. Adjustable net in different heights by periscopic sliding system in zinc-coated steel. Rack winch for stretching the net. Provided with ground sleeves.Volleyball facility TÜV tested in according to UNI EN 1271.
V708/C
Volleyball facility Category A1 competition certified for international competitions, light alloy structure with internal anti-deflection ribs, additional internal reinforcement in anti-deflection steel, completely retractable net adjustment slides. The facility for adjusting the height and tension of the net is started by means of a removable handle, upper pulley in nylon. Volleyball facility supplied complete with ground sleeves to be buried, height 50 cm. Volleyball facility TÜV tested in according to UNI EN 1271
V708
Volleyball facility model Gara transportable on wheels consisting of 2 uprights in aluminum ovoid section mm. 120 x 100 reinforced internally, adjustment of the net by means of periscope slides inside the structure, tensioning of the net by means of a rack and pinion winch, ground support base in steel sheet mm. 8 laser cut with fixing holes at center distance cm. 47, reinforcement rods Ø mm. 25. The facility is supplied complete with anchor bolts and concealed screws MA 14 for fixing. Volleyball facility TÜV tested in according to UNI EN 1271
V703/TR
Monotubolar volleyball facility consisting of 2 main uprights in galvanized steel tubing diam. mm. 100, adjustment of the net by means of periscope slides in galvanized steel diam. mm. 108 and tension of the same by means of a ratchet winch. The volleyball facility is complete with gorund sleeves buried for a depth of cm. 42 with diam. external mm. 108 and specific hole covers in galvanized steel. Volleyball facility TÜV tested in according to UNI EN 1271
V703/T
Monotubular volleyball system consisting of 2 main uprights in galvanized steel tubing diam. mm. 70 x 3, adjustment of the net by means of periscope slides in galvanized steel diam. mm. 76 and tension of the same by means of a ratchet winch. The volleyball facility is complete with ground sleeves to be buried for a depth of cm. 42 with diam. external mm. 76 and complete with covers in galvanized steel.
V700
Pair of volleyball facility model Tournament consisting of n. 2 main uprights in galvanized steel tubing diam. 70 cm., V-shaped ground base in painted steel plate, thickness mm. 8, steel tie rods 25 mm section painted with epoxy powders. Adjustment of the net by means of a special periscope slide that allows, if necessary, to lower the net to tennis height. Mains tension by means of a ratchet winch, screws for fixing to the floor.
V700/2
Pair of volleyball facility model Tournament consisting of n. 2 main uprights in galvanized steel tubing diam. 70 cm., V-shaped ground base in painted steel plate, thickness mm. 8, steel tie rods 25 mm section painted with epoxy powders. Adjustment of the net by means of a special periscope slide that allows, if necessary, to lower the net to tennis height. Mains tension by means of a ratchet winch. Support frame for housing ballast boxes (ballast to 125 kg each post not included).
V704/T
Wall volleyball facility consisting of 2 uprights in galvanized steel tubing section mm. 50, sliders for adjusting the net Ø mm. 56, net tensioning system with ratchet winch, manual net height locking.
V708/M
Monotubular minivolley-superminivolley facility, transportable on wheels complete with galvanized slide tubes for adjusting the height of the bed base, minivolley cm. 210, superminivolley cm. 215.
V730/2
Padded protection for volleyball facility V708 and V700, foam rubber, covered in PVC and velcro closure.
V730/NR
Padded protection for volleyball facility V 708/R,V703/T and V703/TR, in foam rubber and velcro closure.
V730/Q
Pair of padded foam rubber shaped protections with PVC coating and velcro closure for V708/R, V708/C, V703/T and V703/TR volleyball facilities.
V704/P
Padded protection for volleyball facility V704/T, in foam rubber covered in coloured PVC, with velcro closure.
V707/1
Volleyball umpire for standing or seated, built according to FIPAV regulation, structure in painted steel, high stability base measures cm. 110 x 70 with adjustable feet, walking surface in galvanized sheet metal, adjustable platform in various heights from cm. 110 to cm. 150 by manual rack and pinion winch, round tubular railing diam. mm. 40, rear access ladder covered in non-slip material, PVC seat, complete with rubber transport wheels.
V716
Volleyball umpire stand in painted steel ovoid section 60 x 30 mm., rear access ladder covered in non-slip material, protective railing in tubular diam. 30 mm., Walking surface in painted sheet metal, safety spacer, folding, measures cm. 50 x 75 height cm. 130.
202010
Volleyball accessories: net stretching winch, for our following volleyball systems: V700, V700/2,V703/T,V703/TR, V704/T,V708, V708/R
Ideas for Multi gym
F756/C
Set of 4 counterweights for transportable football/futsal goals, made of zinced steel diam.mm.100, to be attach. Ability to ballast up to kg.30 per counterweight
F756
Pair of transportable futsal goals, painted tubular steel structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 300x200. Without nets.Futsal goals certified according to UNI EN 749.
F744
Football field marker trolley in galvanized steel, capacity 30 l with rubber wheels and with front indicator wheel for marking the field lines. Practical and light accessory for accurately tracing the lines of football fields.
V704/T
Wall volleyball facility consisting of 2 uprights in galvanized steel tubing section mm. 50, sliders for adjusting the net Ø mm. 56, net tensioning system with ratchet winch, manual net height locking.
F749/2
Slalom training pole for football. In plastic, height 170 cm, diameter 30 mm, equipped with a steel ferrule without plate.
V723/1
Foldable barrier balls with nylon bag, in galvanised steel frame, can be completely disassembled and folded, transportable on wheels. Measures cm. 65 x 45 x 50 h.
F756/3
Pair of mini football goals in painted steel diam. mm. 80, measures cm. 170x105, complete with with back net supports diam. mm. 30. Upper depth cm. 50 and at the base depth cm. 80. Without nets.
T781/2
Transportable tennis facility, painted steel frame transportable on wheels, complete with brass tensioners. Ballast excluded.
F741
Pair of nets for football goals in polyethylene, dim. 3 mm, 12x12 cm square mesh, knot work, for regular football goals. Dimensions 750x250h cm, high side 100 cm-low side 200 cm.
V723/MA
Wall simulator with irregular surface panel for training in attack and defense in volleyball. It causes the ball to bounce at unpredictable angles. Didactic and preparatory tool for the correction and improvement of the attack and coverage of the attack. Adjustable in height up to 370 cm, swiveling towards the inside or outside of the pitch, tiltable downwards, equipped with a ballast base with wheels (ballast not included. This simulator is equipped with a ball-catcher for the exercises of reception and precision, and, in addition, a ball carrier for balls.
F736/R
Set of 5 single shapes wit 2 metal push rods joint can be used directly into the ground , on a special trolley for 5 dummies (art.F736/1) or single trolley used for synthetic grass (art.F736/C), use for barrier and slalom, adjustable from 175 cm to 200 cm.
F756/B
Pair of futsal goals with ground sleeves, painted tubular steel structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 300x200. Without nets.Futsal goals certified according to UNI EN 749.
V708/M
Monotubular minivolley-superminivolley facility, transportable on wheels complete with galvanized slide tubes for adjusting the height of the bed base, minivolley cm. 210, superminivolley cm. 215.
F749/3
Pole for slalom and dribbling exercises. Ideal for football training in gyms and indoor sports facilities. Plastic rod, total height of cm. 160, plastic half-moon base.
T790
Referee chair for tennis game, painted steel structure, large support base, complete with fold-down written board on the side, plastic seat. Completely disassembled
T781/1
Tennis facility in painted aluminum, ovoid section mm.120x105, complete with ground sleeves and brass tensioners.
A494/1
Limit crossbar for the high jump in fiber of verto length cm. 400; yellow color for perfect visibility in any light condition. Approved W.A.
F731
Pair of football goals with ground sleeves dimensions 6.00x2.00 H m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without lifting device article F731/3 and nets.
M990/1
Pair of rugby goals in regulation size, in painted aluminum round section, complete with ground sleeves. Height outside ground on request.
F742
Pair of nets for football goals, in nylon polyamide braid diam. mm. 3,5, hexagonal mesh, dimensions cm. 750x250h, high side cm. 100-low side cm. 200.
V723/XN
Base in painted steel with wheels, large support surface, great stability, completely disasembled suitable for articles V723/A, V723/B, V723/C, V723/D.
V708/R
Volleyball facility, composed by 2 aluminium uprights, ovoid section mm. 120 x 100 internally reinforced. Adjustable net in different heights by periscopic sliding system in zinc-coated steel. Rack winch for stretching the net. Provided with ground sleeves.Volleyball facility TÜV tested in according to UNI EN 1271.
F757
Pair of transportable futsal goals, painted tubular aluminium structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 300x200. Without nets. Futsal goals certified according to UNI EN 749.
F744/N
Spray soccer field marker trolley, for ecological paint, plastic tank, galvanized steel frame, rubber wheels. Handy and light suitable for pulling the lines of the football field.
F749/F
Set of numbers for player substitution. Numbers from 1 to 30. Double, plasticized, with hand grip, yellow color.
T792
Plastic pinstripe line tape for outdoor tennis court lines, heavy type, white colour, width cm. 4,5. Package mt. 150.
V726
Manual scorekeeper, rotating pole in painted steel, 4 numbers that can be changed at once. Meteore model.
F757/B
Pair of futsal goals with ground sleeves, painted tubular aluminium structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 300x200. Without nets. Futsal goals certified according to UNI EN 749.
F731/1
Pair of transportable football goals dimensions 6.00x2.00 H m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm,back basement on the ground depth cm. 150, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without nets.
F742/4
Pair of nets for football goals, in polyethylene dim. mm. 6, square mesh 10x10 cm, knotless, dimensions cm. 750x250h, high side cm. 100-low side cm. 200.
V707/1
Volleyball umpire for standing or seated, built according to FIPAV regulation, structure in painted steel, high stability base measures cm. 110 x 70 with adjustable feet, walking surface in galvanized sheet metal, adjustable platform in various heights from cm. 110 to cm. 150 by manual rack and pinion winch, round tubular railing diam. mm. 40, rear access ladder covered in non-slip material, PVC seat, complete with rubber transport wheels.
V723/F
Volleyball ball with elastics, suitable for training, in blow rubber. To be used with art. V 723/B.
F757/1
Pair of transportable futsal goals, painted tubular steel structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 400x200. Without nets.
A497
Landing area for pole vaulting, in full and empty differentiated density foam rubber, covered in PVC and anti-tear net in the upper part. Complete with wear mat thickness cm. 10 incorporated in the fall area, including a PVC rain cover. Falling area measures for athletics cm. 500x500x80H, slides of cm. 150/200/250/300.
V726/3
Manual scorekeeper, base in painted steel, rotating post, with 4 easy to read numerals on both sides.
V704/P
Padded protection for volleyball facility V704/T, in foam rubber covered in coloured PVC, with velcro closure.
F757/1B
Pair of futsal goals with ground sleeves, painted tubular steel structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 400x200. Without nets.
M991/1
Set of 4 protections for rugby goals, square section 35x35 cm, height 200 cm, thickness 11 cm, side velcro closure.
F742/5
Pair of nets for football goals, in nylon polyamide braid diam. mm. 6, extra hexagonal mesh, dimensions cm. 750x250h, high side cm. 100-low side cm. 200.
V716
Volleyball umpire stand in painted steel ovoid section 60 x 30 mm., rear access ladder covered in non-slip material, protective railing in tubular diam. 30 mm., Walking surface in painted sheet metal, safety spacer, folding, measures cm. 50 x 75 height cm. 130.
F745/2
Spray soccer field marker trolley, for ecological paint, with rubber wheels and front indicator wheel. This stock accessory is equipped with a plastic pressure tank for ecological paint and complete with engine.
F745/3
Spray field marker trolley for ecological paints, in painted steel, equipped with electric battery pump, complete with battery charger, tank capacity Lt. 18, adjustable side marking.
F746
Shoes washer composed of body and removable pianted steel support rails, n2 lower brushes with plastica holder and short , stiffnylon bristles for cleaning outsole, n.2 side brushes with plastic older and nylon , long and soft bristles for upper cleaning, spray system made of galvanized steel with 4 crossed water jets with adjustable angle.
V726/4
Player subsitution and time out kit, complete with numbered paddles, wooden case and rechargeable batteries.
F757/2B
Pair of futsal goals with ground sleeves, painted tubular aluminium structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 400x200. Without nets.
F792
Benches for coaches / reserves model Serie A, structure in zinced tubular steel, modular and modular, expandable at any time, cover and sides in compact polycarbonate thickness mm. 3. Prepared for fixing to the ground or for transport by means of wheels, seats made of comfortable padded armchairs and covered in washable imitation leather and mounted on a base with wheels. The bench is equipped with protections in the upper front part. Dimensions and structure can be designed according to needs.
V700
Pair of volleyball facility model Tournament consisting of n. 2 main uprights in galvanized steel tubing diam. 70 cm., V-shaped ground base in painted steel plate, thickness mm. 8, steel tie rods 25 mm section painted with epoxy powders. Adjustment of the net by means of a special periscope slide that allows, if necessary, to lower the net to tennis height. Mains tension by means of a ratchet winch, screws for fixing to the floor.
T782
Tennis net, woven polyethylene cord, Ø mm 3,5, with 6 reinforced meshes along all the length, with cable bushing in fabric and tension cable in steel Ø mm. 5. Complete with centre strap with hook and steel buckle. Regular size: length mt. 12,80, height mt. 1. Mesh cm. 4,2 x 4,2.
F731/5
Pair of football goals with ground sleeves dimensions 5.00x2.00 H m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without lifting device article F731/3 and nets. Football goals tested in according to UNI EN 748.
F757/2
Pair of transportable futsal goals, painted tubular aluminium structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 400x200. Without nets.
T797/2
Tennis court separation net, medium type windbreak for bottom tennis field, stabilized against ultra violet rays, perimeter eyeleted every 50 centimeters, density 90%, gr. 125 m2, green color, m. 18 x 2.
F852
HD polyethylene fencing net for football fields, 10x10 cm mesh, 3 mm braid, weight 60 g / m. Used in football and futsal fields to prevent the balls from leaking from the playing field, water-repellent and UV stabilized. Dimensions on request.
V730/2
Padded protection for volleyball facility V708 and V700, foam rubber, covered in PVC and velcro closure.
K1220
Football-tennis kit, outdoor use, complete with net 9x1 m, supports with hooks and steel ferrule, with pickets.
T783/2
Minitennis net, in polyethylene high tenacity net, braid Ø 3 mm, manufactured without knot, mesh 40x40 mm black colour. Upper part with polyester high tenacity band 50 mm, white color, double sewing and polyester rope Ø 6 mm, white colour. Dimensions m. 7x0,75H
F732
Pair of transportable football goals, dimensions 7.32x2.44h m, made of aluminium profiles ovoid section 120x100 mm reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, rear base depth 200 cm and upper net support elbows in zinced steel Ø 40 mm. complete with nylon hooks, anti breakage, assembly screws in class 8.8. without nets. Football goals tested in according to UNI EN 748.
F793
Benches for coaches / reserves model Serie A, structure in aluminium tubular steel, modular and modular, expandable at any time, cover and sides in compact polycarbonate thickness mm. 3. Prepared for fixing to the ground or for transport by means of wheels, seats made of comfortable padded armchairs and covered in washable imitation leather and mounted on a base with wheels. The bench is equipped with protections in the upper front part. Dimensions and structure can be designed according to needs.
F736/1
Trolley for kick wall , in zinced steel, for 5 single shapes, complete with wheels and handle for moving.
V700/2
Pair of volleyball facility model Tournament consisting of n. 2 main uprights in galvanized steel tubing diam. 70 cm., V-shaped ground base in painted steel plate, thickness mm. 8, steel tie rods 25 mm section painted with epoxy powders. Adjustment of the net by means of a special periscope slide that allows, if necessary, to lower the net to tennis height. Mains tension by means of a ratchet winch. Support frame for housing ballast boxes (ballast to 125 kg each post not included).
F748
Set of fixed corner posts for football composit by: n.4 fixed post diam. 30 mm, n.4 flags dim. 60x40 cm, n.4 clips, n.4 ground sleeves with cap. For regular fields.
T783
Tennis net, Torneo model, woven polyethylene cord, Ø mm 3,5,working with knot, with 6 reinforced meshes along the length, complete with polyester cable bushing, double stitching and side reinforcement with passing band. Tension cable in steel Ø mm. 5, complete with centre strap with hook and steel buckle. Regular size: length mt. 12,80, height mt. 1. Mesh cm. 4,2 x 4,2.
F731/15
Pair of transportable football goals dimensions 5.00x2.00 H m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm,back basement on the ground depth cm. 150, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without nets. Football goals tested in according to UNI EN 748.
F758
Pair of nylon braid nets for futsal goals, diameter mm. 3, knotless processing, dimensions cm. 300x200h, high side cm. 100-low side cm. 100, hexagonal mesh.
F755/1
Supporting poles with two reaches. Working arc for header, headwork tool for 2 players, in painted steel tubing, complete with ground sleeves.
T797/3
Tennis court separation net, extra heavy type windbreak for bottom tennis field, stabilized against ultra violet rays, perimeter eyeleted every 50 centimeters, density 90%, gr. 180 m2, green color, m. 18 x 2.
BI-REBOUND
BI-REBOUND powder- coated iron frame cm.130x130, , with 1 side net mesch cm.10x10 and 1 side net mesh cm.5x5, adjustable inclination angle.
F852/B
Perimeter reinforcement edging for fencing net for football fields, consisting of a rope of diam. 6 mm of the same material as the mesh.
V723/A
Ball-catcher, for volleyball training on reception or to increase the accuracy of the setter by placing it in the area where you want the lift. Adjustable height from 190 cm to 320 cm with tiltable upper ring. Base not included.
F735
Pair of football goals with ground sleeves dimensions 7,32x2,44h m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without lifting device article F731/3 and nets. Football goals tested in according to UNI EN 748.
F736/A
Set of 5 single shapes with 1 steel ferrule to be fixed only in the ground for barrier and slalom use, height adjustable from 150 cm to 190 cm.
F748/1
set of flexible corner posts for football, composed of: n.4 flexible posts diam. 30 mm, n.4 flags dimensions cm.60x40, n.4 clips, n.4 ground sleeves with cap. For regular fields.
T783/1
Tennis net Super Torneo, braided network of high tenacity polyethylene diam.mm3, UV-stabilized, heat-set in an autoclave, water repellent, knot working mm.42x42 black shirt, the top six double mesh reinforcement, fixed with double stitching the white band in high tenacity polyester and mm.50 diam.mm.5 galvanized steel cable, two loops on the ends to draw the network center polyester mesh with steel buckle and hook included.
V708/C
Volleyball facility Category A1 competition certified for international competitions, light alloy structure with internal anti-deflection ribs, additional internal reinforcement in anti-deflection steel, completely retractable net adjustment slides. The facility for adjusting the height and tension of the net is started by means of a removable handle, upper pulley in nylon. Volleyball facility supplied complete with ground sleeves to be buried, height 50 cm. Volleyball facility TÜV tested in according to UNI EN 1271
F758/1
Pair of nylon braid nets for soccer goals, diameter mm. 6, knotless processing, dimensions cm. 300x200h, high side cm. 100-low side cm. 100, hexagonal mesh.
F740/1
Pair of nets for reduced football goals, made of polypropylene diameter mm.3, without knot,dimensions cm.650x250 upper depth cm.100- lower depth cm. 150.
V723/B
Spike essential for learning and correcting the fundamentals in volleyball: serve, block and attack. On sale excluding balloon and base.
K859/1
Wall protection made of high density polyethylene covered with colour pvc, thickness mm.22, scratchproof, no-toxic, fireproof class 1.Certificate in reference at UNI EN 913.
F735/PS
Pair of football goals with ground sleeves dimensions 7,32x2,44h m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, detached posts in zinced steel Ø 48 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without lifting device article F731/3 and nets. Football goals tested in according to UNI EN 748.
202010
Volleyball accessories: net stretching winch, for our following volleyball systems: V700, V700/2,V703/T,V703/TR, V704/T,V708, V708/R
F737
Extendable and sliding tunnel for stadiums and football fields on wheels to protect players from entering the locker room and indoor and outdoor playing fields. Supporting structure in aluminum, hinges and connections in steel painted with polyurethane powders, coated fabric in fireproof class M2 PVC. Dimensions: width 2 m, total height 2.4 m. Other sizes on request.
V708
Volleyball facility model Gara transportable on wheels consisting of 2 uprights in aluminum ovoid section mm. 120 x 100 reinforced internally, adjustment of the net by means of periscope slides inside the structure, tensioning of the net by means of a rack and pinion winch, ground support base in steel sheet mm. 8 laser cut with fixing holes at center distance cm. 47, reinforcement rods Ø mm. 25. The facility is supplied complete with anchor bolts and concealed screws MA 14 for fixing. Volleyball facility TÜV tested in according to UNI EN 1271
T785
Central tape strap for tennis net, in polyester white colour, width mm. 50, complete with hook and steel buckle.
F731/8
Pair of transportable football goals made of aluminium Ø 80 mm, dimensions 5.00x2.00 m, reinforced with internal anti-bending ribs; backside support structure in steel Ø 30 mm, complete with nylon hooks, anti breakage. Without nets
T780
Tennis facility for outdoor, in painted steel tube, square section mm. 80 x 80, complete with ground sleeves and brass tensioners.
T801
Paddle facility in according to regulations, in painted steel section mm. 80x80, complete with brass net tensioning winch and plate for fixing on the ground.
F740/15
Pair of nets for reduced football goals, made of polypropylene diameter mm.3, without knot,dimensions cm.500x200 upper depth cm.100- lower depth cm. 150.
V723/C
Telescopic jump tester for measuring the height of the jump; can be adjusted by cm. 230 to cm. 380; base not included.
K859/3
Column protection made of high density polyethylene covered with colour pvc, thickness mm.22, scratchproof, no-toxic, fireproof class 1. Certificate in reference at UNI EN 913.
V703/T
Monotubular volleyball system consisting of 2 main uprights in galvanized steel tubing diam. mm. 70 x 3, adjustment of the net by means of periscope slides in galvanized steel diam. mm. 76 and tension of the same by means of a ratchet winch. The volleyball facility is complete with ground sleeves to be buried for a depth of cm. 42 with diam. external mm. 76 and complete with covers in galvanized steel.
F749/0
Football scoreboard for players substitution. Handy model, double side. Numbers from 1 to 99, fluorescent yellow or orange.
F731/8B
Pair of football goals made of aluminium Ø 80 mm with ground sleeves, dimensions 5.00x2.00 m, reinforced with internal anti-bending ribs; backside support structure in steel Ø 30 mm, complete with nylon hooks, anti breakage. Without nets
A490
Uprights for pole vaulting made of reinforced aluminum diameter 140 x 60 mm with height adjustment movement by means of a telescopic system with locking by means of a knob aluminum rod support rail made of steel with sliding of the trolley by means of nylon wheels graduated from cm. 0 to c.80. height adjustment from cm. 300 to 640. Approved W.A.
F730
Pair of transportable football goals, dimensions 7.32x2.44 H. m, made of stable reinforced aluminum profiles, oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, nets supports in zinced steel diam. 40 mm, back basement on the ground depth m. 2 in aluminum in oval section 120x100 mm complete with guide for inserting hooks for perfect net tension. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without net. Football goals tested in according to UNI EN 748.
F746/4
Protection for coach bench in foam rubber, half moon shape, with covering in colored PVC with velcro for fixing.
T780/1
Tennis facility for outdoor, in painted steel tube, round section mm. 102, complete with ground sleeves and brass tensioners.
T800
Paddle net made of polyethylene HD yarns, stabilized UV rays, waterproof, thermo-fixed, knotless. On the upper side: heavy polyester band 100 mm fixed with double sewing and steel cable 12,50 m. Other sides finished with reinforcement and additional fixing rope.
Completed with central band with hook and buckle.
F740/2
Pair of nets for futsal goals m. 4x2, made of nylon braid diameter mm.3, without knot, upper depth cm.100- lower depth cm. 100.
V723/D
Spike with articulated and adjustable arms for volleyball and minivolley training, protected by soft safety polyurethane. With this tool it is possible to evaluate the way in which the ball is hit and the trajectory it takes. Base and balloon not included.
F756/2
Pair of mini football goals, in painted steel Ø mm 40. Dimensions 150 x 110 cm. Without nets.
V703/TR
Monotubolar volleyball facility consisting of 2 main uprights in galvanized steel tubing diam. mm. 100, adjustment of the net by means of periscope slides in galvanized steel diam. mm. 108 and tension of the same by means of a ratchet winch. The volleyball facility is complete with gorund sleeves buried for a depth of cm. 42 with diam. external mm. 108 and specific hole covers in galvanized steel. Volleyball facility TÜV tested in according to UNI EN 1271
F749/1
Set of numbers for player substitution. Numbers from 1 to 30. Double, plasticized, without hand grip, yellow color.
F758/0
Pair of nets for futsal goals in polyethylene braid, diameter 3 mm, UV stabilized, water-repellent, heat-set, knot-knot, mesh 12x12 cm, dimensions 300x200h cm.
A492
Box for pole vaulting, shaped structure in hot-dip galvanized sheet metal. Regulatory measures.
F730/1
Pair of transportable football goals, dimensions 6.00x2.00 m, made of stable reinforced aluminum profiles, oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, nets supports in zinced steel diam. 40 mm, back basement on the ground depth m. 2 in aluminum in oval section 120x100 mm complete with guide for inserting hooks for perfect net tension. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without nets. Football goals tested in according to UNI EN 748.
T781
Tennis facility, painted steel structure that can be anchored to the floor, complete with brass tensioners and with screw connections.
F740/7
Pair of nets for football goals in HT polypropylene braid, mesh 110x100 mm
Wire diameter Ø 6 mm, UV stabilized, heat set, water repellent. Knotless in a square knit, fully edged on the perimeter to ensure greater strength and durability. Complete with rope for hooking.
F740/5
Pair of football nets, in nylon polyamide braid diam. mm. 3,5, hexagonal mesh, English model, dimensions cm. 750x250h, high side cm. 200-low side cm. 200.
V723/M
Wall simulator with irregular surface panel for training in attack and defense in volleyball. It causes the ball to bounce at unpredictable angles. Didactic and preparatory tool for the correction and improvement of the attack and coverage of the attack. Adjustable in height up to 370 cm, swiveling towards the inside or outside of the pitch, tiltable downwards, equipped with a ballast base with wheels (ballast excluded).
V728/E
Soft Trial volley ball, diam. cm. 21, gr. 220, according to FIVB (Italian Volleyball Federation) specifications.
V730/NR
Padded protection for volleyball facility V 708/R,V703/T and V703/TR, in foam rubber and velcro closure.
E695/9
Pair of 24 second, ideal for basketball, futsal, waterpolo. Functions displayed:24 second shot clock: [0-99], digits 20cm high.Red light: Diameter 8cm. Technical characteristics: Dimensions and weight: 41x29x8.5cm, 6kg for the display panel + 2kg for the 50m cable. Distance and readability angle: 90m, 150 degrees. Complies with DIN 18032-3 and UNI 9554 standards on "resistance to damage from balls".. Supplied with serial cable to connect to the Control Console (console not included) .Robust container made from powder-coated steel, provided with 4 wall brackets and a revolving support stirrup at the base for an easy positioning on the floor.. The horn can be sounded manually or automatically at the end of the 24 seconds, producing a strong acoustic signal (120dB at 1m) with adjustable duration and intensity. The sound of the horn is different from the one made by the game timer. Red light goes on automatically at the end of the game time and the 24 seconds. Power supply: 100-240Vac, 50-60Hz, 70VA
G400/R
Transportable smooth mirror, basement in tubular steel painted diameter mm. 40 complete with nylon wheels for transporting, periscope sliding door diameter 35 mm external and 30 internal which allows the inclination of the mirror from 90 ° to 35 ° approximately. Smooth mirror with safety film, dimensions cm. 100x170H. complete rear frame made of tubular aluminum framework. Special features of this structure is the attachment of multiple modules allows you to create a reflective surface without interruption.
G220
Swedish bench, strucuture in painted steel , rubber feet, complete with balance axis and natural painted wooden top. Dimensions: length m. 3, width cm. 30, height cm. 41.
G407
Fixed bracket for ballet bar. Support to be fixed to the wall, height adjustable by 43 cm, on zinced steel slide.
G126
Balance beam, Baumann type, in varnished wood lenght meter 5, with two trample surfaces, flat and rounded, section 10 x 5 cm. 3 supporting uprights in painted steel with rubber floor pads, fixed height 30 cm.
A585
Shot put throwing platform in hot zinced steel, internal diam. cm 213,5, height cm 7, in-ground installation, cm 2 higher than the tread surface.
H760
Pair of transportable handball goals , in painted steel structure section mm. 80x80, hot zinced steel back supports Ø 30. Dimensions cm. 300x200. Without nets. Handball goals certified according to UNI EN 749.
L957
Boxing bag in vinyl, height 100 cm, Ø 35 cm, weight 50 kg, with leather strap. Complete with chain and spring-hook.
G182
Regular women's balance beam for gymnastics, in natural varnished wood. Painted steel supports with rubberized support points, length 5 m, adjustable in height from cm.50 to cm.120 with periscopic supports in painted and zinced steel, locking by means of handwheels, section 13 x 16 h cm, walking surface 10 cm.
G9
Shelf for the suspension of the rings. painted steel structure, to be fixed to the wall (projection 150 cm). It is equipped with steel pulleys for adjusting the height of the rings from the ground. (excluding rings with ropes).
A521
Hurdle in zinced steel tube with wooden crossbar, automatically adjustable in height cm. 50 - 60 - 76.2.
V707
Volleyball umpire competition built according to FIPAV regulation, structure in painted steel, base with high stability measures cm. 120 x 80 with adjustable feet, walking surface in painted sheet metal, adjustable platform in various heights from cm. 110 to cm. 150 by means of manual rack and pinion winch, tubular sliding in galvanized steel section 80 x 80, railing in round tubular diam. mm. 40, side access ladder covered in non-slip material, PVC seat, complete with rubber transport wheels applied directly.
E695/C
Console for 24- and 30-second shot clock panels for article E695/9. Suitable for Basketball and Water Polo.It is used for autonomously commanding only the 24-second shot clocks (for basketball) or the 30-second shot clocks (for water polo). Technical characteristics: Programming of three times [0 ~ 99 s], of one warning of end time [0 ~ 99 s], and of the length of sound [0 ~ 5 s]. Managing times via specific buttons. Correction of time made easier via specific buttons. Panel horn: can be activated manually or automatically at end time, with 5 volume levels that can be adjusted directly from the keyboard. Brightness of the panels can be adjusted to 4 levels directly from the keyboard. Programmable counter direction (forward-backward). Alphanumeric display of all the main information for easy management of the panels: time counter (seconds and tenths), counter direction, loaded time and programmed times, brightness, and horn volume. Language selection for programming menu: English, French, Spanish, Italian, German.Highly reliable membrane keyboard: 5 million operations per key.2 serial data outputs. Two connectors ensure operational continuity in case one of the 2 outputs fails.Strong container made from powder-coated aluminum. Dimensions and weight: 28.5 x 7.5 x 10.5cm, 1.3kg.Power supply: 12Vdc ±10%, 200mA Max.
B680NEW
Basket ball, PU / rubber plywood, size 7, high grip, suitable for adult and youth categories.
G222
Flat inclinable bench, hooked on stall bars, zinced steel frame, padded wooden top covered in synthetic leather, equipped with foot toe strap.
G408
Pair of transportable supports for ballet bars, in varnished steel. Composed of a heavy circular base with a diameter of 35 cm, and height-adjustable supports on zinced sliding.
A568
Shot put for competition in turned and calibrated iron diameter 108 mm; Weight kg.3. Approved W.A.
G170
Men parallel bars, height and width adjustable, periscopic uprights in double steel tube, galvanized sliders for the graduation of the height and articulated connections to allow the bars to flex freely. Bars in bilaminated wood, oval section, heavy basement.
A586/1
Shot put toe-board, made with a load-bearing structure in hot zinced and varnishing steel, with an upper element in fiberglass thickness mm. 20, replaceable in case of breakage. Suitable for competitions. Approved W.A.
H761
Pair of transportable handball goals, in painted aluminium structure section mm. 80x80, hot zinced steel back supports Ø 30. Dimensions cm. 300x200. Without nets. Handball goals certified according to UNI EN 749.
E695/1
Multisport scoreboard suitable for basketball, volleyball, Futsal, etc.. Features: viewing distance: 110m for 25cm high digits, 90cm for 20cm high digits, Viewing angle: 150°. Compliant with DIN 18032-3 and UNI 9554:1989 standard on "Resistance to damage from balls". Displayed functions: Game time [00:00 - 99:59]: digits 25cm high, Team scores [0 - 199]: digits 25cm high, Period [0 - 9], multisport console, allows the management of more than 10 sports, 7 "color, multilingual touchscreen display, Rechargeable lithium battery. 2.4GHz radio communication, with FHSS technology (spread spectrum and frequency hopping) to avoid interference caused by others devices, USB port for easy updating of sports regulations, Resistance to falls as per EN-60950 standard for portable equipment, Power supply-charger supplied. Clock function to display the time of day, even with the console disconnected. end time: 2.9KHz, 120db / 1m. Sturdy container in powder-coated aluminium. Front panel in polycarbonate. Power supply: 100-240V 85VA. Adhesive inscriptions: LOCAL-GUESTS, HOME-GUEST, etc. Dimensions: 140x83x9cm, Weight: 22kg
K859/D
Rectangular wooden balance board with crossbar support , covered with carpets, dimensions 60x40 cm.
K859/1
Wall protection made of high density polyethylene covered with colour pvc, thickness mm.22, scratchproof, no-toxic, fireproof class 1.Certificate in reference at UNI EN 913.
G223
Flat inclinable bench, hooked on stall bars, zinced steel frame, natural varnished wood top, equipped with foot toe strap.Dimensions cm.180x30
A522
Hurdle in zinced steel tube with wooden crossbar, automatically adjustable in height cm. 76,2-84-91,4
V704/P
Padded protection for volleyball facility V704/T, in foam rubber covered in coloured PVC, with velcro closure.
F755/2
Football ball for supporting post with two reaches used for header practice, complete with hook for application.
V707/1
Volleyball umpire for standing or seated, built according to FIPAV regulation, structure in painted steel, high stability base measures cm. 110 x 70 with adjustable feet, walking surface in galvanized sheet metal, adjustable platform in various heights from cm. 110 to cm. 150 by manual rack and pinion winch, round tubular railing diam. mm. 40, rear access ladder covered in non-slip material, PVC seat, complete with rubber transport wheels.
G203
Elastic trampoline, dimensions cm. 113x113, central part cm. 60x60, complete with side protection, structure in steel hot zinced and adjustable in inclination, suspension with 4 calibrated rubber cables and 4 steel springs. Rubber floor pads.
G408/D
Pair of transportable double supports for ballet bars, in varnished steel. Composed of a heavy circular base with a diameter of 35 cm, and height-adjustable supports on zinced sliding.
A483
Limit crossbar for the high jump in made of fibreglass length cm. 400, yellow color. W.A approved
A569
Shot put for competition in turned and calibrated iron diameter 103 mm; Weight kg.4. Approved W.A.
G171
Women asymentrical parallel bars, height and width adjustable, periscopic uprights in double steel tube, galvanized sliders for the graduation of the height and articulated connections to allow the bars to flex freely. Bars in bilaminated wood, oval section, heavy basement.
H765
Pair of handball nets in nylon with braid diameter mm. 3, mesh mm. 100, dimensions cm. 300 x 200 h., High side cm. 100, low side cm. 100.
V703/T
Monotubular volleyball system consisting of 2 main uprights in galvanized steel tubing diam. mm. 70 x 3, adjustment of the net by means of periscope slides in galvanized steel diam. mm. 76 and tension of the same by means of a ratchet winch. The volleyball facility is complete with ground sleeves to be buried for a depth of cm. 42 with diam. external mm. 76 and complete with covers in galvanized steel.
A638
Javelin throwing circle, in varnished steel, can be install into the ground. Measures: lenght m. 6, height cm. 7.
K859/3
Column protection made of high density polyethylene covered with colour pvc, thickness mm.22, scratchproof, no-toxic, fireproof class 1. Certificate in reference at UNI EN 913.
G330
Single bracket for pole, in painted steel to be anchored to the wall, complete with hook for the pole.
A523
Olympic model competition hurdle, made with a sturdy steel frame and aluminum telescopic uprights. Height adjustable to 7 heights by means of automatic snap buttons in the measures of cm. 65.0, 68.6, 76.2, 83.8, 91.4 99.1 and 106.7; Internal sliding counterweights made of galvanized steel and graduable. Approved W.A
G395
Mat transport trolley in varnished steel., complete with two fixed and two swivel wheels. Dimensions cm. 200 x 100.
F755/3
Football ball, with two reaches, for header, in synthetic rubber,ULTVE40, for training, complete with hook for application.
V716
Volleyball umpire stand in painted steel ovoid section 60 x 30 mm., rear access ladder covered in non-slip material, protective railing in tubular diam. 30 mm., Walking surface in painted sheet metal, safety spacer, folding, measures cm. 50 x 75 height cm. 130.
A569/1
Shot put for competition in turned and calibrated iron diameter 115 mm; Weight kg.5. Approved W.A.
G394
Foldable gymnastics mat, interior in foam rubber, covering in washable vinyl, dimensions cm. 175x 60 x 3 h.
A601/1
Reduction ring to convert discus to hammer platform, in in painted wood. External diameter cm.125, internal diameter cm.107
A519
Series of 10 hurdles Over fixed height starting from cm. 12 up to cm. 30 in painted steel structure with red bands.
H765/1
Pair of handball nets in nylon, braid diameter mm. 6, mesh mm. 100, dimensions cm. 300 x 200 h., High side cm. 100, low side cm. 100.
V703/TR
Monotubolar volleyball facility consisting of 2 main uprights in galvanized steel tubing diam. mm. 100, adjustment of the net by means of periscope slides in galvanized steel diam. mm. 108 and tension of the same by means of a ratchet winch. The volleyball facility is complete with gorund sleeves buried for a depth of cm. 42 with diam. external mm. 108 and specific hole covers in galvanized steel. Volleyball facility TÜV tested in according to UNI EN 1271
E695
Multisport scoreboard suitable for basketball, volleyball, futsal, etc. Key features: Digit height: 15cm. Readability distance: 50m. • Readability angle 150°, Resistant to damage from balls as per DIN 18032-3 and UNI 9554 standards, communication via radio or cable, display of: team scores, game time, timeout, team fouls, period, ball possession, display of the time of the day, Horn, suitable for indoor application, wall mounting. Supplied with brackets, dimensions: 91x60x9.5cm, weight 10.1kg. Displayed functions: Team scores: [0 - 199], Game time: [00:00 - 99:59], Timeout: [3 light indicators per team], Team fouls / Sets won: [0-9], Ball possession/Service/Bonus: [1 light indicator per team], Period: [0 - 9], multisport console, reliable radio communication: by 2.4GHz FHSS (Frequency Hopping Spread Spectrum) radio transmission to avoid interferences. Suitable for indoor application, installation instructions in 5 languages. Supplied with bolts and brackets for wall mounting, clock function to display time of the day, also with unplugged console, Time expired horn: 2.9KHz, 95db/2m, suitable for not particularly noisy venues, sturdy powder-coated aluminium case. Polycarbonate front panel power supply: 100-240V 85VA. Adhesive labels: HOME-GUEST, LOCALES-VISITANTES etc.
G162
Springboard for gymnastic, Reuther model, springboard made of a multilayer of beach varnished in natural colour, covered with rubber. Non slip rubber floor supports.
G211
Stall bars composed by two spans, in natural varnished beech, ovoid rungs, complete with attachments for fixing to the wall, dimensions cm. 90 x 250 h.
V710
Regulation size volleyball net, Torneo model, knot working, polyethylene rope diam. mm. 3,5, length mt. 9,5, height mt. 1, meshwork cm. 10 x 10. Comes complete with 50 mm. polyester upper band and steel cable diam. mm. 5. Nylon cord diam. mm. 6 in the lower part. Regulation size.
G142
Gymnastics track in netting polyethylene with closed cell, complete with carpet, in red colour. Dimensions: lenght mt. 14, width mt. 2, thickness cm.3,5.
V700
Pair of volleyball facility model Tournament consisting of n. 2 main uprights in galvanized steel tubing diam. 70 cm., V-shaped ground base in painted steel plate, thickness mm. 8, steel tie rods 25 mm section painted with epoxy powders. Adjustment of the net by means of a special periscope slide that allows, if necessary, to lower the net to tennis height. Mains tension by means of a ratchet winch, screws for fixing to the floor.
A569/2
Shot put for competition in turned and calibrated iron diameter 120 mm; Weight kg.6. Approved W.A.
G173
Women asymetrical parallel bars with tie rod complete with fiberglass rail, with height and width adjustment.
V704/T
Wall volleyball facility consisting of 2 uprights in galvanized steel tubing section mm. 50, sliders for adjusting the net Ø mm. 56, net tensioning system with ratchet winch, manual net height locking.
G400
Transportable smooth mirror with safety film, mounted on a painted steel tube structure equipped with wheels. Dimensions cm. 100x170H.
G355/7
Mattress "CUBONE" in expanded rubber D. 16, covering with coloured pvc, antibacterial, treated to mildew resist, fire-resistant class 2, zipper fastener, provided of handles for easy carrying. Dimensions cm 200 x 100 x 80 h.
K859/H
Rectangular wooden balance board with half-moon support, covered with carpets, dimensions 60x40 cm.
E695/2
Multisport scoreboard ideal for: Basketball, Volleyball, futsal, Handball, Hockey, Tennis, etc.. Functions displayed: Game time: [00:00 - 99:59], digits 30cm high.Team scores: [0-199], digits 30cm high. Period: [0-9], digit 30cm high. Team fouls / Sets won: [0-9], digits 30cm high. Bonus: [1 light indicator per team], 8cm diameter. Timeout: [3 light indicators per team], 8cm diameter. Possession/Service/Turn: [indicator arrows].Technical Characteristics: Dimensions: 200x180x9cm. Weight: 60kg. Distance and readability angle: 130m 150 degrees, team-names readable up to 90m.Meets F.I.B.A. specifications. No front protection cover required. Complies with DIN 18032-3 and UNI 9554 standards on "resistance to damage from balls." Using the Control Console you can choose different operation modes depending on the sport selected: game and interval time, count back or forward, display last minute tenths of a second, display time of day, etc..The horn can be sounded manually or automatically when the time expires, producing a strong acoustic signal (120dB at 1m) with adjustable duration and intensity. Provided with bolts and brackets for wall mounting. Adhesive labels HOME-GUEST, HEIM-GÄSTE, LOCAUX-VISITEURS LOCALES-VISITANTES. Robust container made from powder-coated aluminium. Front panel made from anti-glare polycarbonate. Supplied with serial cable to connect to the Control console, 60m long. Power supply: 100-240Vac, 50-60Hz, 210VA. Complete with control console large backlit graphic display, 5.6" (11.5x8.7cm), makes it possible to view all the information on the scoreboards at the same time. USB port. Makes it easy to update the console software using a PC, useful when changing between the rules of one sport and another. Multilingual. All the words and instructions on the display appear in the language selected. Highly reliable membrane keyboard. Strong container made from powder-coated aluminium. Dimensions and weight: 31.5x19x12cm, 1.9kg. Power supply: 12Vdc ±10%, 200mA Max.
G190
Transportable horizontal ladder, in natural varnished wood, adjustable height up to mt. 2.5 and reclining. Complete with uprights in painted steel tubing, high stability. Length mt. 5.
G163
Springboard Gymnova double sprung beech plywood and floor covered with carpet. Dimensions: cm.120x60x21
G212
Stall bars composed by one span, disasembled in natural varnished beech, ovoid rungs, complete with attachments for fixing to the wall, dimensions cm. 90 x 250 h.
V711
Volleyball net, heavy model, knot working, propylene cord diam. mm. 2,5. Net complete with 50 mm. polyester upper band and steel cable diam. mm. 5. Nylon cord diam. mm. 6 in the lower part. Regulation size.
K859/M
Board “Skimmy”made in rubber , with a cylindrical shape with lateral valve, diameter 32.5 cm, height 6 cm, weight 1.2 kg, different colours.
G380.1
Gym Mat K 14 in in cross-linked and expanded polyethylene, antibacterial, non-slip bottom Dimensions cm. 200 x 100 x 3 h.
V700/2
Pair of volleyball facility model Tournament consisting of n. 2 main uprights in galvanized steel tubing diam. 70 cm., V-shaped ground base in painted steel plate, thickness mm. 8, steel tie rods 25 mm section painted with epoxy powders. Adjustment of the net by means of a special periscope slide that allows, if necessary, to lower the net to tennis height. Mains tension by means of a ratchet winch. Support frame for housing ballast boxes (ballast to 125 kg each post not included).
G450
Pair of barbell holders, with double independently adjustable barbell support system, with disc holder, maximum structure weight kg.200, adjustable width.
G181
Regular women's balance beam for gymnastics, in natural varnished wood. Painted steel supports with rubberized support points, length 5 m, adjustable in height from cm.80 to cm.120 with periscopic supports in painted and zinced steel, locking by means of handwheels, section 13 x 16 h cm, walking surface 10 cm.
A642
Pyramid section mark, in painted sheet, numbered according to the event, which can be used for shot put, hammer throwing, discus throwing and javelin throwing. Complete set of 12 pieces.
A569/3
Shot put for competition in turned and calibrated iron diameter 125 mm; Weight kg.7,260. Approved W.A.
V708/M
Monotubular minivolley-superminivolley facility, transportable on wheels complete with galvanized slide tubes for adjusting the height of the bed base, minivolley cm. 210, superminivolley cm. 215.
B687/5
Basketball "Molten B6G4000" in synthetic leather, measures n.7. In according to FIBA. regulations.
G400/B
Smooth mirror with safety film, designed for wall mounting, complete with skirting board above and below. Dimensions cm. 100x200H, thickness mm. 4
G355/8
Mattress "CUBONE" in expanded rubber D. 18, covering with coloured pvc, antibacterial, treated to mildew resist, fire-resistant class 2, zipper fastener, provided of handles for easy carrying. Dimensions cm 200 x 100 x 80 h.
G191
Wall fixed horizontal ladder,in natural varnished wood, adjustable height and inclination. Complete with 2 lateral support shelves in painted steel tubing. The shelves can be drawn alongside the wall when the ladder is not used. Length mt. 5
G165
Gymnastics accessories: frame in zinced and painted steel, for springboards similar to Reuther models, you can correct and maintain the distance between the piece of apparatus and springboard.
G213
Stall bars composed by two spans, disasembled in natural varnished beech, ovoid rungs, complete with attachments for fixing to the wall, dimensions cm. 180 x 250 h.
K859/N
Board “Super Skimmy” made in rubber, with a cylindrical shape with lateral valve, diameter cm. 40, height cm. 9, weight kg. 2,2, different colours.
G381.1
Gym Mat K 16 in in cross-linked and expanded polyethylene, antibacterial, non-slip bottom Dimensions cm. 200 x 100 x 4 h.
E695/4
Tabletop Portable multisport scoreboard ideal for basketball, volleyball, futsal, water polo, kick-boxing, ping-pong, etc.; Height of digits: 9cm, easily visible for over 30m;Scores: from 0 to 199 per team; Fouls/Sets/Other: from 0 to 9 per team; Possession/Round: 1 luminous point per team; Periods: from 0 to 9;Timeout: 4 luminous points per team; Chronometer: from 00:00 to 99:59. Acoustic signal: automatic to the end of time (if enabled) or manual, with 3 different types of sound and 3 levels of volume; Training mode: programming of sequences "action-pause" by the setting of the Action time, Pause time and Number of sequences; useful for kick-boxing, boxing, fitness environments, etc. CASING: light, resistant and easily transportable; Casing: light, resistant and easily transportable; Console with bright display behind the scoreboard for easy table use with membrane keyboard; Adhesive lables HOME-GUEST, HEIM-GÄSTE, LOCAUX-VISITEURS, LOCALES-VISITANTES; Power supply: is provided with a 100-240V/12Vdc AC Power Adaptor; Dimensions and weight: 55x35x9.5cm, 3.6kg
A488/1
Support platform for modular mattresses, reticular structure in hot zinced steel, ground support feet with enlarged base. Height from the ground 20 cm.
G112/3
Locker for ball holder, in painted metal mesh, 5 x 5 cm mesh, with swivel wheels, hinged doors, and fixed shleves. Dimensions cm.153x76x165h.
V708/R
Volleyball facility, composed by 2 aluminium uprights, ovoid section mm. 120 x 100 internally reinforced. Adjustable net in different heights by periscopic sliding system in zinc-coated steel. Rack winch for stretching the net. Provided with ground sleeves.Volleyball facility TÜV tested in according to UNI EN 1271.
B687/6
Basketball "Molten B7G4000" in synthetic leather, measures n.7. In according to FIBA regulations.
G60/1
Rope for rhythmic gymnastics, in coloured polyester, without handles, length 280 cm, diameter 10 mm.
G355/9
Mattress "CUBONE" in expanded rubber D.30, covering with coloured pvc, antibacterial, treated to mildew resist, fire-resistant class 2, zipper fastener, provided of handles for easy carrying. Dimensions cm 200 x 100 x 80 h.
G192
Orthopaedic curved ladder, in natural varnished wood, in varnished natural colour, with 7 protruding rungs, middle strip in multilayer wooden, adjustable height through a painted steel frame, for wall mounting. Dimensions: width cm 100, length m. 3.
V711/SN
Volleyball net, Mondial Extra model, in according to FIPAV (Italian Volleyball Federation) standards, in high tenacity nylon, mesh diam. mm. 5, worked without knots. On the upper part, band in polyester mm. 70 and steel cable diam. mm. 5. On the lower part, band in polyester mm. 50 and nylon cable diam. mm. 6. Complete with movable antenna holder bands, lateral bands for traction, glass-fibre poles diam. mm. 10. Length mt. 9,5, height mt. 1.
K859/O
Board “Medusa”, hemisphere with double layer rubber, with a cylindrical shape with lateral valve, diameter 45 cm, height 23 cm, weight 3.4 kg., different colours.
G382.1
Gym Mat K 20 in in cross-linked and expanded polyethylene, antibacterial, non-slip bottom Dimensions cm. 200 x 100 x 5 h.
V708
Volleyball facility model Gara transportable on wheels consisting of 2 uprights in aluminum ovoid section mm. 120 x 100 reinforced internally, adjustment of the net by means of periscope slides inside the structure, tensioning of the net by means of a rack and pinion winch, ground support base in steel sheet mm. 8 laser cut with fixing holes at center distance cm. 47, reinforcement rods Ø mm. 25. The facility is supplied complete with anchor bolts and concealed screws MA 14 for fixing. Volleyball facility TÜV tested in according to UNI EN 1271
E695/0
Fight timer for boxing, spinning, aerobics, kickboxing, taekwondo. FEATURES:5 Timers are available, each one is easily activated by the corresponding key, which can be associated to multiple sporting activities without having to reset the times for every occasion; Various modalities of functioning can be obtained by programming the 4 parameters of every Timer: time of action, of pause, of final pause [0-90 minutes] and number of sequences [0-99];Modality of time count, forwards or backwards; Visualization of the time and number of cycles with numbers that measure 9cm high, easily visible for over 30m;The choice of 2 sounds and 3 levels of intensity for signalling every start/end action; Booking of the automatic start of a Timer at the end of the one currently active, with a considerable increase in the combinations of time counts: for example, a different number of cycles with different durations of action + pause can follow a certain number of cycles of action + pause; Simultaneous functioning of two Timers: the first one has a sound signal and visualizes the times, the second one only has a different sound signal at the beginning-end of every action; this allows to register 2 sporting activities at the same time, such as a boxing meeting and a training sequence; Wall installation fixed with two screws, on request table version; Robust insulated plastic enclosure, without the need of using a ground connection. Provided with a cable and plug; High quality flat membrane keyboard, power supply: 115/230Vac, 50/60Hz, 6VA
H776
Handball ball for men with triple layer : internal in vulcanized rubber, external in soft rubber, offers anti-shock safety and a safe and natural grip n.3, weight gr. 350, diameter 16.5 cm. Approved by the International Handball Federation.
A510
Long and triple jump check mark, in varnished hard wood. Measures: width cm 30, lenght cm 122, height cm 10. Complete with slot for a small board which holds plastiline, width cm 10, lenght cm 122.
L953
Boxing bag in vinyl for boxing and karate training, height 120 cm, Ø 35 cm, weight 40 kg. Complete with chain and spring-hook.
V723/1.
Foldable barrier balls with nylon bag, in galvanised steel frame, can be completely disassembled and folded, transportable on wheels. Measures cm. 65 x 45 x 50 h.
K855
Cylindrical shaped foam rubber cushion, covered with coloured PVC fabric fire resistant class 2, Measures 100 cm x 25 cm.
G63
Rope for rhythmic gymnastics, in polyester rope, without handles, reinforced in the centre, lenght 300 mm and diameter 8 mm.
A620
Discus throwing circle, structure in zinced steel. Internal diam. cm 250, regular measures, in-ground installation, cm 2 higher than the tread surface.
E695/6
Multisport scoreboard, with side panels for the number and fouls of 12 players. FIBA approved, level 2. Suitable for: Basketball, 3x3 Basketball, Minibasket, Volleyball, 5-a-side Football, Water Polo, Handball, Netball, Ice Hockey, Hockey Track, Tennis, Ping Pong, Badminton, Boxing, Wrestling, etc. Digit height of the main views: 25cm. Readability distance: 110m for digits 25cm high, 90m for digits 20cm high Visibility angle: 150 ° Display functions: Programmable team names [6 characters per team]: height 16cm. Stopwatch [00:00 - 99:59 ]: figures 25cm high. Team scores [0 - 199]: figures 25cm high. Period [0 - 9, E]: figures 20cm high. Penalty times [0:00 - 9:59] / Team fouls / Set won [0 - 99]: digits 20cm high. Player's jersey number [4 - 15]: fixed, non-modifiable digits, 8.3cm high. Fouls / Penalties [4 luminous points + 1 red]: diameter 2.5cm. Square red on basketball: as per the latest FIBA regulations. Timeout [3 light spots per team]: diameter 2.5cm. Ball possession / Service / Round [1 light spot per team]: diameter 2.5cm. Resistant to ball hits in accordance with DIN 18032-3 and UNI 9554: 1989 "Ball impact resistance test", complete with display console, radio communication takes place at 2.4GHz in FHSS mode with spread spectrum and frequency hopping to avoid interference. Suitable for indoor use. Stopwatch. Using the Control Console, various operating modes can be set depending on the sport selected: game and interval times, count up or down, display of tenths of a second in the last minute of play, display of the time of day , etc .. Clock function to display the time of day, even with the console disconnected. The horn allows the manual and automatic emission, at the end of the time, of a loud acoustic signal [120dB (A) at 1m] adjustable in duration and intensity. Sturdy container in powder-coated aluminum. Front panel in anti-reflective polycarbonate. Power supply: 100-240VAC, 50 / 60Hz, 400VA. Comes with power cord and plug Dimensions and weight: 241x143x9cm, 70kg.
G193
Orthopaedic straight ladder, in natural varnished wood, in varnished natural colour, with 7 protruding rungs, middle strip in multilayer wooden, adjustable height through a painted steel frame, for wall mounting. Dimensions: width cm 100, length m. 3.
A470
Pair of upright jumpers for high jump consisting of vertical upright in galvanized steel with centimeter indication, millimetric height adjustment cursors, ground base in painted steel with adjustable feet. Height adjustment up to 250 cm.
G383.1
Gym Mat K 24 in in cross-linked and expanded polyethylene, antibacterial, non-slip bottom Dimensions cm. 200 x 100 x 6 h.
H777
Handball ball for women in triple layer: internal in vulcanized rubber, external in soft rubber, offers anti-shock safety and a secure and natural grip n.2, gr. 290, diam. cm. 16. Approved by the International Handball Federation.
E695.11
KIT of 24 seconds, to visualise the 24 seconds and time-out, consists of a console with a keyboard and two display panels. FEATURES: Possibility of modifying attack possession time and time-out from 1 to 99 seconds;20-cm-high figures in red. Visibility: 70m;Handling of the 14 seconds rule (as the latest FIBA regulation); Green light on display indicating the time count in action; End of time period buzzer on each display; Two display connecting cables are supplied: 1 x 20m + 1 x40m;Various cable extension lengths available on request; Possibility of adding two more display panels; Power supply: depending on version, 230Vac or 115Vac, 35VA MAX; Size: 2pz 29,2x30,4x4,4cm +1pz 20x8x12,5cm;Weight: 8.9kg
V723/F.
Volley ball with elastic bands, suitable for practice, in blow rubber, to be used with art. V 723/B.
G64
Rope for rhythmic gymnastics, in polyester rope, with handles, reinforced in the centre, lenght 300 mm and diameter 8 mm.
E695/8
Pair of statistics panels showing the Player No. and Fouls/Penalties of 12 players on the 2 teams, ideal for Basketball, Volleyball, futsal etc..F unctions displayed for each player (12 players per team):Player number: [0-99], digits 15cm high.Fouls/Penalties: [4 indicator lights + 1 red], diameter 3.2cm. Technical characteristics for both panels:Dimensions and weight: 120x260x11.5cm, 68kg. Distance and readability angle: 70m , 150 degrees. No front protection cover required. Complies with DIN 18032-3 and UNI 9554 standards on "resistance to damage from balls". Meets F.I.B.A. specifications. Supplied with serial cable 4m in length to connect to the main electronics scoreboard or on the radio receiver. Robust container made from powder-coated aluminum. Front panel made from anti-glare polycarbonate. Control Console not included. Power supply: 100-240Vac, 50-60Hz, 145VA.
G200
Orthopedic straight ladder, uprights in painted steel tubing, rungs and middle strip in varnished natural colour, middle strip in multilayer wooden, adjustable height through a painted steel frame, for wall mounting. Dimensions: width cm. 50, length mt. 3.
A473
Pair of high jump stands for competition made of aluminum, with telescopic adjustment system; high stability painted steel base with wheels for transport. W.A. approved
K859/Q
Board “Tartaruga” hemisphere made in rubber complete with a lateral valve, diameter 65 cm, height 24 cm, weight 6.5 kg., different colours.
G370
Tatami for judo in cross-linked and expanded polyethylene with special coupling system, reversible, antibacterial and hypoallergenic. Color red/green, dimensions cm. 100 x 100 x 3.5 h.
B606
Alternating possession arrow. Dimensions and weight: 56x23,5x4 cm, 1.7 kg; Distance and readability angle: 90 m (295 ft), 150 degrees; Meets F.I.B.A. specifications; Lights formed by groups of leds (typical life: 100.000 hours!);Robust insulated plastic enclosure, without the need of using a ground connection. Provided with the power cord and plug; Power supply: 100-240 Vac, 50-60 Hz, 40 mA.
V708/C
Volleyball facility Category A1 competition certified for international competitions, light alloy structure with internal anti-deflection ribs, additional internal reinforcement in anti-deflection steel, completely retractable net adjustment slides. The facility for adjusting the height and tension of the net is started by means of a removable handle, upper pulley in nylon. Volleyball facility supplied complete with ground sleeves to be buried, height 50 cm. Volleyball facility TÜV tested in according to UNI EN 1271
G180
Regular women's balance beam for gymnastics, in natural varnished wood. Painted steel supports with rubberized support points, length 5 m, fixed height 50 cm, section 13 x 16 h cm, walking surface 10 cm.
V714/S
Pair of flexible antennas, in glass fiber, white-red colour, for volleyball playgrounds. Lenght cm. 180. Detachable in two pieces.
V730/2
Padded protection for volleyball facility V708 and V700, foam rubber, covered in PVC and velcro closure.
G201
Orthopedic curved ladder, uprights in painted steel tubing, rungs and middle strip in varnished natural colour, middle strip in multilayer wooden, adjustable height through a painted steel frame, for wall mounting. Dimensions: width cm. 50, length mt. 3.
A474
Pair of uprights for high jump, in zinced steel, quadrangular section, T shaped base, provided with metal measuring system in centimetres attached to the bar rest, height cm 250, graduation by periscopical system with incorporated cursor.
G125
Balance beam, Baumann type, in varnished wood lenght meter 5, with two trample surfaces, flat and rounded, section 10 x 5 cm. 3 supporting uprights in painted steel with rubber floor pads, adjustable height 37 - 42 - 47 cm.
G373/1
Tatami for karate in cross-linked and expanded polyethylene with special coupling system, reversible, antibacterial and hypoallergenic. Color red/blue, dimensions cm. 100 x 100 x 2 h.
L956
Boxing bag in vinyl for boxing training, height 150 cm, Ø 35 cm, weight 45 kg, complete with chain and spring-hook.
H765/AM
Pair of handball nets in nylon with braid diameter mm. 3, white color, complete with shock-absorbing net