Name: Bench for tennis court
Brand: Artisport
SKU: T796

F744

Football field marker trolley in galvanized steel, capacity 30 l with rubber wheels and with front indicator wheel for marking the field lines. Practical and light accessory for accurately tracing the lines of football fields.

V703/TR

Monotubolar volleyball facility consisting of 2 main uprights in galvanized steel tubing diam. mm. 100, adjustment of the net by means of periscope slides in galvanized steel diam. mm. 108 and tension of the same by means of a ratchet winch. The volleyball facility is complete with gorund sleeves buried for a depth of cm. 42 with diam. external mm. 108 and specific hole covers in galvanized steel. Volleyball facility TÜV tested in according to UNI EN 1271

F756

Pair of transportable futsal goals, painted tubular steel structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 300x200. Without nets.Futsal goals certified according to UNI EN 749.

V708/C

Volleyball facility Category A1 competition certified for international competitions, light alloy structure with internal anti-deflection ribs, additional internal reinforcement in anti-deflection steel, completely retractable net adjustment slides. The facility for adjusting the height and tension of the net is started by means of a removable handle, upper pulley in nylon. Volleyball facility supplied complete with ground sleeves to be buried, height 50 cm. Volleyball facility TÜV tested in according to UNI EN 1271

F749/2

Slalom training pole for football. In plastic, height 170 cm, diameter 30 mm, equipped with a steel ferrule without plate.

V707/1P

Padded protection in foam rubber covered in pvc for volleyball umpire stand article V707/1.

A492/1

Fiberglass vault box for vaulting pole, measures according to rules.

V723/1

Foldable barrier balls with nylon bag, in galvanised steel frame, can be completely disassembled and folded, transportable on wheels. Measures cm. 65 x 45 x 50 h.

T801

Paddle facility in according to regulations, in painted steel section mm. 80x80, complete with brass net tensioning winch and plate for fixing on the ground.

F741

Pair of nets for football goals in polyethylene, dim. 3 mm, 12x12 cm square mesh, knot work, for regular football goals. Dimensions 750x250h cm, high side 100 cm-low side 200 cm.

V723/MA

Wall simulator with irregular surface panel for training in attack and defense in volleyball. It causes the ball to bounce at unpredictable angles. Didactic and preparatory tool for the correction and improvement of the attack and coverage of the attack. Adjustable in height up to 370 cm, swiveling towards the inside or outside of the pitch, tiltable downwards, equipped with a ballast base with wheels (ballast not included. This simulator is equipped with a ball-catcher for the exercises of reception and precision, and, in addition, a ball carrier for balls.

T781

Tennis facility, painted steel structure that can be anchored to the floor, complete with brass tensioners and with screw connections.

K859/1

Wall protection made of high density polyethylene covered with colour pvc, thickness mm.22, scratchproof, no-toxic, fireproof class 1.Certificate in reference at UNI EN 913.

F744/1

Replacement brush for field marker trolley F 744.

V704/T

Wall volleyball facility consisting of 2 uprights in galvanized steel tubing section mm. 50, sliders for adjusting the net Ø mm. 56, net tensioning system with ratchet winch, manual net height locking.

F756/B

Pair of futsal goals with ground sleeves, painted tubular steel structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 300x200. Without nets.Futsal goals certified according to UNI EN 749.

K1221

Football-tennis kit, indoor/outside use, complete 1 net, supports with plastic base.

F731/8

Pair of transportable football goals made of aluminium Ø 80 mm, dimensions 5.00x2.00 m, reinforced with internal anti-bending ribs; backside support structure in steel Ø 30 mm, complete with nylon hooks, anti breakage. Without nets

T800

Paddle net made of polyethylene HD yarns, stabilized UV rays, waterproof, thermo-fixed, knotless. On the upper side: heavy polyester band 100 mm fixed with double sewing and steel cable 12,50 m. Other sides finished with reinforcement and additional fixing rope. Completed with central band with hook and buckle.

F749/3

Pole for slalom and dribbling exercises. Ideal for football training in gyms and indoor sports facilities. Plastic rod, total height of cm. 160, plastic half-moon base.

T787

Replacement tape for tennis net upper band, in polyester.

202011

Ratchet to winch for volleyball facility with cm. 60 belt and hook.

A494/1

Limit crossbar for the high jump in fiber of verto length cm. 400; yellow color for perfect visibility in any light condition. Approved W.A.

V724

Set of wooden numbered paddles for players substitution, pack of 12 pieces.

F742

Pair of nets for football goals, in nylon polyamide braid diam. mm. 3,5, hexagonal mesh, dimensions cm. 750x250h, high side cm. 100-low side cm. 200.

V723/XN

Base in painted steel with wheels, large support surface, great stability, completely disasembled suitable for articles V723/A, V723/B, V723/C, V723/D.

F731

Pair of football goals with ground sleeves dimensions 6.00x2.00 H m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without lifting device article F731/3 and nets.

T781/2

Transportable tennis facility, painted steel frame transportable on wheels, complete with brass tensioners. Ballast excluded.

K859/3

Column protection made of high density polyethylene covered with colour pvc, thickness mm.22, scratchproof, no-toxic, fireproof class 1. Certificate in reference at UNI EN 913.

F744/N

Spray soccer field marker trolley, for ecological paint, plastic tank, galvanized steel frame, rubber wheels. Handy and light suitable for pulling the lines of the football field.

V708/M

Monotubular minivolley-superminivolley facility, transportable on wheels complete with galvanized slide tubes for adjusting the height of the bed base, minivolley cm. 210, superminivolley cm. 215.

F757

Pair of transportable futsal goals, painted tubular aluminium structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 300x200. Without nets. Futsal goals certified according to UNI EN 749.

F731/8B

Pair of football goals made of aluminium Ø 80 mm with ground sleeves, dimensions 5.00x2.00 m, reinforced with internal anti-bending ribs; backside support structure in steel Ø 30 mm, complete with nylon hooks, anti breakage. Without nets

F740/7

Pair of nets for football goals in HT polypropylene braid, mesh 110x100 mm Wire diameter Ø 6 mm, UV stabilized, heat set, water repellent. Knotless in a square knit, fully edged on the perimeter to ensure greater strength and durability. Complete with rope for hooking.

F749/F

Set of numbers for player substitution. Numbers from 1 to 30. Double, plasticized, with hand grip, yellow color.

T790

Referee chair for tennis game, painted steel structure, large support base, complete with fold-down written board on the side, plastic seat. Completely disassembled

F730

Pair of transportable football goals, dimensions 7.32x2.44 H. m, made of stable reinforced aluminum profiles, oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, nets supports in zinced steel diam. 40 mm, back basement on the ground depth m. 2 in aluminum in oval section 120x100 mm complete with guide for inserting hooks for perfect net tension. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without net. Football goals tested in according to UNI EN 748.

V726

Manual scorekeeper, rotating pole in painted steel, 4 numbers that can be changed at once. Meteore model.

F742/4

Pair of nets for football goals, in polyethylene dim. mm. 6, square mesh 10x10 cm, knotless, dimensions cm. 750x250h, high side cm. 100-low side cm. 200.

V707

Volleyball umpire competition built according to FIPAV regulation, structure in painted steel, base with high stability measures cm. 120 x 80 with adjustable feet, walking surface in painted sheet metal, adjustable platform in various heights from cm. 110 to cm. 150 by means of manual rack and pinion winch, tubular sliding in galvanized steel section 80 x 80, railing in round tubular diam. mm. 40, side access ladder covered in non-slip material, PVC seat, complete with rubber transport wheels applied directly.

F731/1

Pair of transportable football goals dimensions 6.00x2.00 H m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm,back basement on the ground depth cm. 150, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without nets.

M990/1

Pair of rugby goals in regulation size, in painted aluminum round section, complete with ground sleeves. Height outside ground on request.

K859/4

“L” profile for protection edges column, dimensions cm. 8x8x2 thick., height cm. 200

F745/1

Ecological paint for field marker trolley. Pack of 14

V708/R

Volleyball facility, composed by 2 aluminium uprights, ovoid section mm. 120 x 100 internally reinforced. Adjustable net in different heights by periscopic sliding system in zinc-coated steel. Rack winch for stretching the net. Provided with ground sleeves.Volleyball facility TÜV tested in according to UNI EN 1271.

F757/1

Pair of transportable futsal goals, painted tubular steel structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 400x200. Without nets.

F758/0

Pair of nets for futsal goals in polyethylene braid, diameter 3 mm, UV stabilized, water-repellent, heat-set, knot-knot, mesh 12x12 cm, dimensions 300x200h cm.

T802

Pair of paddle facility protection in rubber foam cm.5, with covering in PVC, velcro closing

T792

Plastic pinstripe line tape for outdoor tennis court lines, heavy type, white colour, width cm. 4,5. Package mt. 150.

F730/1

Pair of transportable football goals, dimensions 6.00x2.00 m, made of stable reinforced aluminum profiles, oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, nets supports in zinced steel diam. 40 mm, back basement on the ground depth m. 2 in aluminum in oval section 120x100 mm complete with guide for inserting hooks for perfect net tension. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without nets. Football goals tested in according to UNI EN 748.

A497

Landing area for pole vaulting, in full and empty differentiated density foam rubber, covered in PVC and anti-tear net in the upper part. Complete with wear mat thickness cm. 10 incorporated in the fall area, including a PVC rain cover. Falling area measures for athletics cm. 500x500x80H, slides of cm. 150/200/250/300.

V726/3

Manual scorekeeper, base in painted steel, rotating post, with 4 easy to read numerals on both sides.

F742/5

Pair of nets for football goals, in nylon polyamide braid diam. mm. 6, extra hexagonal mesh, dimensions cm. 750x250h, high side cm. 100-low side cm. 200.

V707/1

Volleyball umpire for standing or seated, built according to FIPAV regulation, structure in painted steel, high stability base measures cm. 110 x 70 with adjustable feet, walking surface in galvanized sheet metal, adjustable platform in various heights from cm. 110 to cm. 150 by manual rack and pinion winch, round tubular railing diam. mm. 40, rear access ladder covered in non-slip material, PVC seat, complete with rubber transport wheels.

F731/2

Pair of device used for transporting football goals

M991

Rugby ball in rubber double layer ULTIMA 70.

F756/C

Set of 4 counterweights for transportable football/futsal goals, made of zinced steel diam.mm.100, to be attach. Ability to ballast up to kg.30 per counterweight

F745/2

Spray soccer field marker trolley, for ecological paint, with rubber wheels and front indicator wheel. This stock accessory is equipped with a plastic pressure tank for ecological paint and complete with engine.

V723/F

Volleyball ball with elastics, suitable for training, in blow rubber. To be used with art. V 723/B.

F756/P

Set of n. 4 protections for futsal posts.

T780/2

Pair of posts for single game, painted steel structure.

F749/P

Set of 48 space marker cones, in different colours, complete with cone holder.

T794

Drag mat in coconut, cm. 200 x 120.

F756/3

Pair of mini football goals in painted steel diam. mm. 80, measures cm. 170x105, complete with with back net supports diam. mm. 30. Upper depth cm. 50 and at the base depth cm. 80. Without nets.

A500

Pole vault pole, customized according to the weight of the athlete.

V726/4

Player subsitution and time out kit, complete with numbered paddles, wooden case and rechargeable batteries.

F756/R1

Pair of nets for article F756/2.

V716

Volleyball umpire stand in painted steel ovoid section 60 x 30 mm., rear access ladder covered in non-slip material, protective railing in tubular diam. 30 mm., Walking surface in painted sheet metal, safety spacer, folding, measures cm. 50 x 75 height cm. 130.

F731/3

Pair of lifting device for football goals.

M991/1

Set of 4 protections for rugby goals, square section 35x35 cm, height 200 cm, thickness 11 cm, side velcro closure.

F736/R

Set of 5 single shapes wit 2 metal push rods joint can be used directly into the ground , on a special trolley for 5 dummies (art.F736/1) or single trolley used for synthetic grass (art.F736/C), use for barrier and slalom, adjustable from 175 cm to 200 cm.

F746/S

Seat for coaches benches on football fields. Seat in plastic material.

V716/P

Padded protection in expanded heliocel, covered with PVC for the high chair V716 and V716/B.

F757/2

Pair of transportable futsal goals, painted tubular aluminium structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 400x200. Without nets.

T781/1

Tennis facility in painted aluminum, ovoid section mm.120x105, complete with ground sleeves and brass tensioners.

F749/Q

Coaching senior bibs

T797

Green net for fencing, made in polyethylene, Ø mm. 3, mesh cm. 4.5 x 4.5.

F756/4

Nets for mini football goals article F756/3

F852

HD polyethylene fencing net for football fields, 10x10 cm mesh, 3 mm braid, weight 60 g / m. Used in football and futsal fields to prevent the balls from leaking from the playing field, water-repellent and UV stabilized. Dimensions on request.

V730/2

Padded protection for volleyball facility V708 and V700, foam rubber, covered in PVC and velcro closure.

F736/1

Trolley for kick wall , in zinced steel, for 5 single shapes, complete with wheels and handle for moving.

V700

Pair of volleyball facility model Tournament consisting of n. 2 main uprights in galvanized steel tubing diam. 70 cm., V-shaped ground base in painted steel plate, thickness mm. 8, steel tie rods 25 mm section painted with epoxy powders. Adjustment of the net by means of a special periscope slide that allows, if necessary, to lower the net to tennis height. Mains tension by means of a ratchet winch, screws for fixing to the floor.

F732

Pair of transportable football goals, dimensions 7.32x2.44h m, made of aluminium profiles ovoid section 120x100 mm reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, rear base depth 200 cm and upper net support elbows in zinced steel Ø 40 mm. complete with nylon hooks, anti breakage, assembly screws in class 8.8. without nets. Football goals tested in according to UNI EN 748.

F792

Benches for coaches / reserves model Serie A, structure in zinced tubular steel, modular and modular, expandable at any time, cover and sides in compact polycarbonate thickness mm. 3. Prepared for fixing to the ground or for transport by means of wheels, seats made of comfortable padded armchairs and covered in washable imitation leather and mounted on a base with wheels. The bench is equipped with protections in the upper front part. Dimensions and structure can be designed according to needs.

F736/C

Single trolley for shape F736/R, ideal for synthetic grass.

F748

Set of fixed corner posts for football composit by: n.4 fixed post diam. 30 mm, n.4 flags dim. 60x40 cm, n.4 clips, n.4 ground sleeves with cap. For regular fields.

T782

Tennis net, woven polyethylene cord, Ø mm 3,5, with 6 reinforced meshes along all the length, with cable bushing in fabric and tension cable in steel Ø mm. 5. Complete with centre strap with hook and steel buckle. Regular size: length mt. 12,80, height mt. 1. Mesh cm. 4,2 x 4,2.

208060

nylon hook for football goal nets.

F758

Pair of nylon braid nets for futsal goals, diameter mm. 3, knotless processing, dimensions cm. 300x200h, high side cm. 100-low side cm. 100, hexagonal mesh.

F749/I

Double agility speed ladder with joint clip for ladders connection, lenght 6 m.

F755/1

Supporting poles with two reaches. Working arc for header, headwork tool for 2 players, in painted steel tubing, complete with ground sleeves.

T797/2

Tennis court separation net, medium type windbreak for bottom tennis field, stabilized against ultra violet rays, perimeter eyeleted every 50 centimeters, density 90%, gr. 125 m2, green color, m. 18 x 2.

F757/B

Pair of futsal goals with ground sleeves, painted tubular aluminium structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 300x200. Without nets. Futsal goals certified according to UNI EN 749.

F852/B

Perimeter reinforcement edging for fencing net for football fields, consisting of a rope of diam. 6 mm of the same material as the mesh.

V723/A

Ball-catcher, for volleyball training on reception or to increase the accuracy of the setter by placing it in the area where you want the lift. Adjustable height from 190 cm to 320 cm with tiltable upper ring. Base not included.

F736/A

Set of 5 single shapes with 1 steel ferrule to be fixed only in the ground for barrier and slalom use, height adjustable from 150 cm to 190 cm.

V700/2

Pair of volleyball facility model Tournament consisting of n. 2 main uprights in galvanized steel tubing diam. 70 cm., V-shaped ground base in painted steel plate, thickness mm. 8, steel tie rods 25 mm section painted with epoxy powders. Adjustment of the net by means of a special periscope slide that allows, if necessary, to lower the net to tennis height. Mains tension by means of a ratchet winch. Support frame for housing ballast boxes (ballast to 125 kg each post not included).

F735

Pair of football goals with ground sleeves dimensions 7,32x2,44h m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without lifting device article F731/3 and nets. Football goals tested in according to UNI EN 748.

F793

Benches for coaches / reserves model Serie A, structure in aluminium tubular steel, modular and modular, expandable at any time, cover and sides in compact polycarbonate thickness mm. 3. Prepared for fixing to the ground or for transport by means of wheels, seats made of comfortable padded armchairs and covered in washable imitation leather and mounted on a base with wheels. The bench is equipped with protections in the upper front part. Dimensions and structure can be designed according to needs.

K859/6

Glue for fixing wall and column protections.

F748/1

set of flexible corner posts for football, composed of: n.4 flexible posts diam. 30 mm, n.4 flags dimensions cm.60x40, n.4 clips, n.4 ground sleeves with cap. For regular fields.

T783

Tennis net, Torneo model, woven polyethylene cord, Ø mm 3,5,working with knot, with 6 reinforced meshes along the length, complete with polyester cable bushing, double stitching and side reinforcement with passing band. Tension cable in steel Ø mm. 5, complete with centre strap with hook and steel buckle. Regular size: length mt. 12,80, height mt. 1. Mesh cm. 4,2 x 4,2.

V704/P

Padded protection for volleyball facility V704/T, in foam rubber covered in coloured PVC, with velcro closure.

F758/1

Pair of nylon braid nets for soccer goals, diameter mm. 6, knotless processing, dimensions cm. 300x200h, high side cm. 100-low side cm. 100, hexagonal mesh.

F746

Shoes washer composed of body and removable pianted steel support rails, n2 lower brushes with plastica holder and short , stiffnylon bristles for cleaning outsole, n.2 side brushes with plastic older and nylon , long and soft bristles for upper cleaning, spray system made of galvanized steel with 4 crossed water jets with adjustable angle.

V723/B

Spike essential for learning and correcting the fundamentals in volleyball: serve, block and attack. On sale excluding balloon and base.

K806

Hand pump for soccer and volleyball balls.

T797/3

Tennis court separation net, extra heavy type windbreak for bottom tennis field, stabilized against ultra violet rays, perimeter eyeleted every 50 centimeters, density 90%, gr. 180 m2, green color, m. 18 x 2.

F757/1B

Pair of futsal goals with ground sleeves, painted tubular steel structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 400x200. Without nets.

F740/1

Pair of nets for reduced football goals, made of polypropylene diameter mm.3, without knot,dimensions cm.650x250 upper depth cm.100- lower depth cm. 150.

F737

Extendable and sliding tunnel for stadiums and football fields on wheels to protect players from entering the locker room and indoor and outdoor playing fields. Supporting structure in aluminum, hinges and connections in steel painted with polyurethane powders, coated fabric in fireproof class M2 PVC. Dimensions: width 2 m, total height 2.4 m. Other sizes on request.

F735/PS

Pair of football goals with ground sleeves dimensions 7,32x2,44h m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, detached posts in zinced steel Ø 48 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without lifting device article F731/3 and nets. Football goals tested in according to UNI EN 748.

F745/3

Spray field marker trolley for ecological paints, in painted steel, equipped with electric battery pump, complete with battery charger, tank capacity Lt. 18, adjustable side marking.

T783/1

Tennis net Super Torneo, braided network of high tenacity polyethylene diam.mm3, UV-stabilized, heat-set in an autoclave, water repellent, knot working mm.42x42 black shirt, the top six double mesh reinforcement, fixed with double stitching the white band in high tenacity polyester and mm.50 diam.mm.5 galvanized steel cable, two loops on the ends to draw the network center polyester mesh with steel buckle and hook included.

K807

Plastic bottle cage with 6 bottles of 1 L.

G389

Polyethylene mat, dimensions cm. 180 x 50 x 0.8 h.

K1206

Packaging of 3 sponge balls, diameter 70 mm.

PLIFIX

package 25 plifix

F740/15

Pair of nets for reduced football goals, made of polypropylene diameter mm.3, without knot,dimensions cm.500x200 upper depth cm.100- lower depth cm. 150.

V723/C

Telescopic jump tester for measuring the height of the jump; can be adjusted by cm. 230 to cm. 380; base not included.

K859/8

Eyelets for wall / column protections

K815

Metal penny whistle with cord for soccer, indoor football and futsal referee.

F757/2B

Pair of futsal goals with ground sleeves, painted tubular aluminium structure diam. mm.80, hot zinced steel back supports Ø 30. Dimensions cm. 400x200. Without nets.

F737/2

Plastic hurdle for football training, support bases, graduated in height up to 100 cm

V708

Volleyball facility model Gara transportable on wheels consisting of 2 uprights in aluminum ovoid section mm. 120 x 100 reinforced internally, adjustment of the net by means of periscope slides inside the structure, tensioning of the net by means of a rack and pinion winch, ground support base in steel sheet mm. 8 laser cut with fixing holes at center distance cm. 47, reinforcement rods Ø mm. 25. The facility is supplied complete with anchor bolts and concealed screws MA 14 for fixing. Volleyball facility TÜV tested in according to UNI EN 1271

F756/1

Mini football goals in plastic complete with net. Dimensions 160 x 110 cm.

202010

Volleyball accessories: net stretching winch, for our following volleyball systems: V700, V700/2,V703/T,V703/TR, V704/T,V708, V708/R

F731/5

Pair of football goals with ground sleeves dimensions 5.00x2.00 H m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without lifting device article F731/3 and nets. Football goals tested in according to UNI EN 748.

F749/0

Football scoreboard for players substitution. Handy model, double side. Numbers from 1 to 99, fluorescent yellow or orange.

T785

Central tape strap for tennis net, in polyester white colour, width mm. 50, complete with hook and steel buckle.

K1220

Football-tennis kit, outdoor use, complete with net 9x1 m, supports with hooks and steel ferrule, with pickets.

A490

Uprights for pole vaulting made of reinforced aluminum diameter 140 x 60 mm with height adjustment movement by means of a telescopic system with locking by means of a knob aluminum rod support rail made of steel with sliding of the trolley by means of nylon wheels graduated from cm. 0 to c.80. height adjustment from cm. 300 to 640. Approved W.A.

V715

Volleyball net spacers, painted steel tubing, with holes for two stretching cables.

BI-REBOUND

BI-REBOUND powder- coated iron frame cm.130x130, , with 1 side net mesch cm.10x10 and 1 side net mesh cm.5x5, adjustable inclination angle.

F740/2

Pair of nets for futsal goals m. 4x2, made of nylon braid diameter mm.3, without knot, upper depth cm.100- lower depth cm. 100.

V723/D

Spike with articulated and adjustable arms for volleyball and minivolley training, protected by soft safety polyurethane. With this tool it is possible to evaluate the way in which the ball is hit and the trajectory it takes. Base and balloon not included.

K859/9

"T" profiling finish for wall and column protection , lenght m.2

F746/4

Protection for coach bench in foam rubber, half moon shape, with covering in colored PVC with velcro for fixing.

T780

Tennis facility for outdoor, in painted steel tube, square section mm. 80 x 80, complete with ground sleeves and brass tensioners.

T783/2

Minitennis net, in polyethylene high tenacity net, braid Ø 3 mm, manufactured without knot, mesh 40x40 mm black colour. Upper part with polyester high tenacity band 50 mm, white color, double sewing and polyester rope Ø 6 mm, white colour. Dimensions m. 7x0,75H

V703/T

Monotubular volleyball system consisting of 2 main uprights in galvanized steel tubing diam. mm. 70 x 3, adjustment of the net by means of periscope slides in galvanized steel diam. mm. 76 and tension of the same by means of a ratchet winch. The volleyball facility is complete with ground sleeves to be buried for a depth of cm. 42 with diam. external mm. 76 and complete with covers in galvanized steel.

F756/2

Pair of mini football goals, in painted steel Ø mm 40. Dimensions 150 x 110 cm. Without nets.

F731/15

Pair of transportable football goals dimensions 5.00x2.00 H m, made of aluminum profiles oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm,back basement on the ground depth cm. 150, upper elbows in zinced steel Ø 40 mm. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without nets. Football goals tested in according to UNI EN 748.

F749/1

Set of numbers for player substitution. Numbers from 1 to 30. Double, plasticized, without hand grip, yellow color.

T785/B

Brass winch, round section, for tennis facility.

F737/3

Set of 12 plastic hurdles, modular, fixed height 10-20-30-40-50-60 cm.

A492

Box for pole vaulting, shaped structure in hot-dip galvanized sheet metal. Regulatory measures.

V723

Wooden signal case, 18 holes.

F731/4P

Set of 4 protection for detached post for football goals, in PE with covering in PVC

F740/5

Pair of football nets, in nylon polyamide braid diam. mm. 3,5, hexagonal mesh, English model, dimensions cm. 750x250h, high side cm. 200-low side cm. 200.

V723/M

Wall simulator with irregular surface panel for training in attack and defense in volleyball. It causes the ball to bounce at unpredictable angles. Didactic and preparatory tool for the correction and improvement of the attack and coverage of the attack. Adjustable in height up to 370 cm, swiveling towards the inside or outside of the pitch, tiltable downwards, equipped with a ballast base with wheels (ballast excluded).

T780/1

Tennis facility for outdoor, in painted steel tube, round section mm. 102, complete with ground sleeves and brass tensioners.

A580

Shot put rack in painted steel tubing.

T783/2

Minitennis net, in polyethylene high tenacity net, braid Ø 3 mm, manufactured without knot, mesh 40x40 mm black colour. Upper part with polyester high tenacity band 50 mm, white color, double sewing and polyester rope Ø 6 mm, white colour. Dimensions m. 7x0,75H

V728/N

Beach-volley ball in sinthetic leather, Molten BEACH-22, coloured

F735/B

Pair of transportable beach-soccer goals, dimensions 5.50x2.20h m, made of aluminium profiles ovoid section 120x100 mm reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, rear base depth 150 cm and upper net support elbows in zinced steel Ø 40 mm. complete with nylon hooks, anti breakage, assembly screws in class 8.8. Without nets.

A533

Starting block ambidextrous adjustable with two blocks, in shaped wood, support surface covered with synthetic material, with transverse plate for starting from the bottom of the gym.

T797

Green net for fencing, made in polyethylene, Ø mm. 3, mesh cm. 4.5 x 4.5.

A624/1-11

Discus throwing protection cage

V731/P

Packaging of 12 badminton shuttlecocks.

V709/T

Beach volleyball / tennis facilities in steel tube Ø 70 mm, complete with slides for adjusting the net Ø 76 mm, ratchet winch, cables and gorund sleeves for anchoring to the ground.

A585

Shot put throwing platform in hot zinced steel, internal diam. cm 213,5, height cm 7, in-ground installation, cm 2 higher than the tread surface.

T780/2

Pair of posts for single game, painted steel structure.

T782

Tennis net, woven polyethylene cord, Ø mm 3,5, with 6 reinforced meshes along all the length, with cable bushing in fabric and tension cable in steel Ø mm. 5. Complete with centre strap with hook and steel buckle. Regular size: length mt. 12,80, height mt. 1. Mesh cm. 4,2 x 4,2.

F740/B

Pair of nets for beach soccer goals, in nylon, dimensions 550 x 220 cm.

A533/1

Starting block in non-slip rubber for indoor use in the gym.

T797/2

Tennis court separation net, medium type windbreak for bottom tennis field, stabilized against ultra violet rays, perimeter eyeleted every 50 centimeters, density 90%, gr. 125 m2, green color, m. 18 x 2.

A595/F

Wire for hammer.

V731/R

Badminton racket in alluminium-graphite.

V1001

Drill for sand perforation for beach volley game

A586/1

Shot put toe-board, made with a load-bearing structure in hot zinced and varnishing steel, with an upper element in fiberglass thickness mm. 20, replaceable in case of breakage. Suitable for competitions. Approved W.A.

T781/1

Tennis facility in painted aluminum, ovoid section mm.120x105, complete with ground sleeves and brass tensioners.

T783

Tennis net, Torneo model, woven polyethylene cord, Ø mm 3,5,working with knot, with 6 reinforced meshes along the length, complete with polyester cable bushing, double stitching and side reinforcement with passing band. Tension cable in steel Ø mm. 5, complete with centre strap with hook and steel buckle. Regular size: length mt. 12,80, height mt. 1. Mesh cm. 4,2 x 4,2.

F740/S

Set of marking tapes for beach soccer fields consisting of two 37 m tapes, 80 mm wide, with eyelets on the ends and two 28 m tapes, 80 mm wide, with eyelets on the ends.

T797/3

Tennis court separation net, extra heavy type windbreak for bottom tennis field, stabilized against ultra violet rays, perimeter eyeleted every 50 centimeters, density 90%, gr. 180 m2, green color, m. 18 x 2.

A597

Transportable hammer rack, in painted steel.

A586/2

Shot put toe-board in fibreglass. Approved W.A.

V712/Q

Tape for beach volley court boundary lines, complete with galvanized stakes and elastics, for regular beach-volley court

A586/A

Shot put toe-board stop made of wood

T796

Bench for tennis court, structure in hot zinced steel and plastic plank, lenght m.2

T783/1

Tennis net Super Torneo, braided network of high tenacity polyethylene diam.mm3, UV-stabilized, heat-set in an autoclave, water repellent, knot working mm.42x42 black shirt, the top six double mesh reinforcement, fixed with double stitching the white band in high tenacity polyester and mm.50 diam.mm.5 galvanized steel cable, two loops on the ends to draw the network center polyester mesh with steel buckle and hook included.

K1206

Packaging of 3 sponge balls, diameter 70 mm.

A535

Starting block for competition made entirely of aluminum with longitudinal adjustment and aluminum sheet shoes with adjustable inclination, with synthetic rubber coating. Approved W.A.

A601/1

Reduction ring to convert discus to hammer platform, in in painted wood. External diameter cm.125, internal diameter cm.107

A567

Shot put for competition in turned and calibrated iron diameter 80 mm; Weight kg.2

V713/R

Beach-tennis net, mesh 45 x 45 cm, also used to bench tennis games.

A490

Uprights for pole vaulting made of reinforced aluminum diameter 140 x 60 mm with height adjustment movement by means of a telescopic system with locking by means of a knob aluminum rod support rail made of steel with sliding of the trolley by means of nylon wheels graduated from cm. 0 to c.80. height adjustment from cm. 300 to 640. Approved W.A.

U1004

Unihoc basic set (up to 13/14 years) total length bat 95 cm, 6 bat red blade clubs + 6 bat yellow blade clubs + 6 balls

T785

Central tape strap for tennis net, in polyester white colour, width mm. 50, complete with hook and steel buckle.

V726/1

Manual table scoreboard, with 4 reading blocks.

A638

Javelin throwing circle, in varnished steel, can be install into the ground. Measures: lenght m. 6, height cm. 7.

T780

Tennis facility for outdoor, in painted steel tube, square section mm. 80 x 80, complete with ground sleeves and brass tensioners.

A568

Shot put for competition in turned and calibrated iron diameter 108 mm; Weight kg.3. Approved W.A.

V713/S

Beach-volley net, with colored band, heavy model, according to regulations. Length 8.5 m, height 1 m, mesh 10x10 cm.

A492

Box for pole vaulting, shaped structure in hot-dip galvanized sheet metal. Regulatory measures.

U1005

Unihoc advanced set (over 13 years) total length bat 110 cm, 6 bat green blade clubs + 6 bat yellow blade clubs + 6 balls

T785/B

Brass winch, round section, for tennis facility.

V730/NR

Padded protection for volleyball facility V 708/R,V703/T and V703/TR, in foam rubber and velcro closure.

A639

Javelin rack.

T780/1

Tennis facility for outdoor, in painted steel tube, round section mm. 102, complete with ground sleeves and brass tensioners.

A569

Shot put for competition in turned and calibrated iron diameter 103 mm; Weight kg.4. Approved W.A.

V713/T

Beach-volley net Extra, with coloured professional band, measures according to regulations. Length 8.5 m, height 1 m, mesh 10x10 cm.

A492/1

Fiberglass vault box for vaulting pole, measures according to rules.

U1006

Unihoc mask

V709

Beach volleyball facility in aluminium, internally reinforced, section ovoid 120x100 cm. adjustment of the net in various heights with periscope sliding inside the upright, complete with cables, elongated bosses for anchoring to the ground, with tensioning winch. Official beach volleyball Italian stage

A648

Vortex weight gr.150.

T781

Tennis facility, painted steel structure that can be anchored to the floor, complete with brass tensioners and with screw connections.

A569/1

Shot put for competition in turned and calibrated iron diameter 115 mm; Weight kg.5. Approved W.A.

V716/B

Beach volleyball umpire stand in hot zinced steel, ovoid section 60 x 30 mm., rear access ladder covered in non-slip material, protective railing in tubular diam. 30 mm., Walking surface in sheet metal, safety spacer,foldable, measures cm. 50 x 75 height cm. 130. Ground support feet widened to give greater stability

A494/1

Limit crossbar for the high jump in fiber of verto length cm. 400; yellow color for perfect visibility in any light condition. Approved W.A.

U1007

Unihoc perforated ball

T787

Replacement tape for tennis net upper band, in polyester.

T781/2

Transportable tennis facility, painted steel frame transportable on wheels, complete with brass tensioners. Ballast excluded.

V709/2

Beach volleyball facility in steel tube diam. 50 mm, polyvalent basic model for sand and grass fields, equipped with ground sleeves with sliding net connections, galvanized pegs with adjustable tie rods.

A618/1

Soft rubber disc, diameter cm. 22, weight 2 kg.

A569/2

Shot put for competition in turned and calibrated iron diameter 120 mm; Weight kg.6. Approved W.A.

V728/Q

Beach-volley ball in sinthetic leather PU, Molten "V5B5000", according to F.I.V.B.

A537

Relay baton in coloured aluminium, regular size.

T790

Referee chair for tennis game, painted steel structure, large support base, complete with fold-down written board on the side, plastic seat. Completely disassembled

A619

Trasportable discus rack, in painted steel.

V713/B

Net for badminton facility, in nylon, length mt. 6,1.

V709/3

Beach volleyball facility in aluminum, round section 80 mm, net height adjustment by means of telescopic slides, net tensioning with rack and pinion winch, complete with cables and elongated ground sleeves for anchoring to the ground.

A569/3

Shot put for competition in turned and calibrated iron diameter 125 mm; Weight kg.7,260. Approved W.A.

A497

Landing area for pole vaulting, in full and empty differentiated density foam rubber, covered in PVC and anti-tear net in the upper part. Complete with wear mat thickness cm. 10 incorporated in the fall area, including a PVC rain cover. Falling area measures for athletics cm. 500x500x80H, slides of cm. 150/200/250/300.

Bench for tennis court

Related products for Tennis

Ideas for Outdoor facility