Sport
Basketball
Football - Soccer
5-a-side football - Minisoccer
Beach soccer
Handball
Volleyball
G340
Wooden wall bars, 16 squares ( 4 x 4), natural colour, can be leaning against the wall or can be fixed to the wall, each square cm. 50 x 50.
Small stand for 12 people
S100
Small stand in hot zinced steel, square tube mm. 35 x 35 seat with fireproof class 1 without backrest, footrest cm. 45 non-slip. Compatibility 12 seats distributed on 3 rows. Length m. 2 for each module
Related products for Environments
V708/M
Monotubular minivolley-superminivolley facility, transportable on wheels complete with galvanized slide tubes for adjusting the height of the bed base, minivolley cm. 210, superminivolley cm. 215.
V730/2
Padded protection for volleyball facility V708 and V700, foam rubber, covered in PVC and velcro closure.
V708/R
Volleyball facility, composed by 2 aluminium uprights, ovoid section mm. 120 x 100 internally reinforced. Adjustable net in different heights by periscopic sliding system in zinc-coated steel. Rack winch for stretching the net. Provided with ground sleeves.Volleyball facility TÜV tested in according to UNI EN 1271.
F744/N
Spray soccer field marker trolley, for ecological paint, plastic tank, galvanized steel frame, rubber wheels. Handy and light suitable for pulling the lines of the football field.
F730/1
Pair of transportable football goals, dimensions 6.00x2.00 m, made of stable reinforced aluminum profiles, oval section 120x100 mm, reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, nets supports in zinced steel diam. 40 mm, back basement on the ground depth m. 2 in aluminum in oval section 120x100 mm complete with guide for inserting hooks for perfect net tension. Complete with nylon hooks, anti breakage, and assembling nuts in class 8.8. Without nets. Football goals tested in according to UNI EN 748.
F735/B
Pair of transportable beach-soccer goals, dimensions 5.50x2.20h m, made of aluminium profiles ovoid section 120x100 mm reinforced by internal stiffening ribs which don't bend, profile connection posts/crossbar in steel tubing section 80x80x4 mm, rear base depth 150 cm and upper net support elbows in zinced steel Ø 40 mm. complete with nylon hooks, anti breakage, assembly screws in class 8.8. Without nets.
I900
Medical examination couch built with solid supporting structure in zinced steel section 50 x 50 mm, support frame in painted steel section. 40 x 30 mm, padded top covered in washable blue synthetic leather; reclining headboard on a special manual rack support. Dimensions 185 x 58 x 78 h cm.
Ideas for Stadium
C7
Fixed modular grandstand for inside use, structure in tubular steel painted with epoxy powders of appropriate section, vertical legs with recesses for attachment of support surfaces and stairways, rear reinforcement crosses, front plugging in painted press-bent sheet metal, decking in fireproof phenolic bonded plywood according to the law, seat surface in class 1 fireproof plywood or alternatively with polypropylene seats, side and rear parapets in painted steel height 110 cm. Dimensions and features on request.
C8
Telescopic grandstand certified according to the regulations and DM in force at 500 kg / m2. Supporting structure in steel of appropriate section, sliding wheels in polyamide, walking surfaces in class 1 fireproof plywood, fronts in fireproof wooden material, side and rear parapets height 110 cm which always remain in position without having to be removed when closing. Seats with a choice of polypropylene seats or completely wooden. Manual locking and unlocking system that can be easily operated by means of a retractable handle. Tread 70/75 cm raised 34/38 cm for a maximum depth in closed position of 130 cm. Possibility of motorization of the grandstand with self-centering motors.
C9
Modular stage for events, walking surface in birch plywood, colors to choose from mahogany, yellow or red. The stage has a range of static 600/kg/mq. Certificate in accordance with the regulations. Standard dimensions cm. 200x200, on request dimensions cm. 200x100 or cm. 100x100.
S101
Small tribune lenght m. 2 m arranged on 3 rows, seat in polypropylene with fireproof backrest cl 1, plywood walking surfaces (other walking surfaces on request), rear wheels for quick overturning and storage in the warehouse. Capacity 12 seats, length 2 m, depth 1.90 m.
C3
Seat without backrest in colored polypropylene, finish with anti-ultraviolet light resistance treatment, reaction to fire class 1 according to the regulations in force issued by the Ministry of the Interior. Dimensions cm. 40 x 35 x 11.
S101.8
Small tribune lenght m. 2 m arranged on 2 rows, seat in polypropylene with fireproof backrest cl 1, plywood walking surfaces (other walking surfaces on request), rear wheels for quick overturning and storage in the warehouse. Capacity 8 seats, length 2 m, depth 1.20 m.
C5
Seat with high backrest in colored polypropylene, finish with anti-ultraviolet light resistance treatment, reaction to fire class 1 according to the regulations in force issued by the Ministry of the Interior. Dimensions cm.44 x 35 x 35.
C11
Dividing curtain for gyms, consisting of a load-bearing structure anchored to the roof beams with special devices, 380V electric motor with gear electro-brake safety factor F = 2; on the two sides of the beam there are 2 electromechanical safety brakes, double PVC sheet of 900 g / m2 full height. Possibility of combined curtain with PVC sheet up to a height of 2.6 m while a square mesh net is positioned on the upper part. Upper structure for the winding of the awning in painted steel. Color of the fabric and structure to be chosen from among the available. Dimensions on request. Documentation: TUV DIN 18032/4 CERTIFICATE for the system EN 13501-1 CERTIFICATE for the PVC sheet
C12
Modular public/athletes dividers in according to UNI EN 13200-3, height 110 cm including n.1 hot zinced post section 70 x 20 mm + n ° 3 horizontal elements in round section 48 mm. Possibility of executing pedestrian gates with latch closure. Installation with ground plate or with ground sleeves. The dividers can be protected with shockproof material according to UNI EN 913 (on request). Other dividers can be made with steel, glass or plexiglass infill.
C6
Fixed modular grandstand for outdoor use, supporting structure in tubular and corner steel of adequate section, calculated as per standards and Ministerial Decree In force for a load of 500kg / m2, walking surfaces in non-slip galvanized sheet metal, seating surfaces in fireproof plywood alternatively with seats. Dimensions and features on request.
C6
Fixed modular grandstand for outdoor use, supporting structure in tubular and corner steel of adequate section, calculated as per standards and Ministerial Decree In force for a load of 500kg / m2, walking surfaces in non-slip galvanized sheet metal, seating surfaces in fireproof plywood alternatively with seats. Dimensions and features on request.
C7
Fixed modular grandstand for inside use, structure in tubular steel painted with epoxy powders of appropriate section, vertical legs with recesses for attachment of support surfaces and stairways, rear reinforcement crosses, front plugging in painted press-bent sheet metal, decking in fireproof phenolic bonded plywood according to the law, seat surface in class 1 fireproof plywood or alternatively with polypropylene seats, side and rear parapets in painted steel height 110 cm. Dimensions and features on request.
C8
Telescopic grandstand certified according to the regulations and DM in force at 500 kg / m2. Supporting structure in steel of appropriate section, sliding wheels in polyamide, walking surfaces in class 1 fireproof plywood, fronts in fireproof wooden material, side and rear parapets height 110 cm which always remain in position without having to be removed when closing. Seats with a choice of polypropylene seats or completely wooden. Manual locking and unlocking system that can be easily operated by means of a retractable handle. Tread 70/75 cm raised 34/38 cm for a maximum depth in closed position of 130 cm. Possibility of motorization of the grandstand with self-centering motors.
C9
Modular stage for events, walking surface in birch plywood, colors to choose from mahogany, yellow or red. The stage has a range of static 600/kg/mq. Certificate in accordance with the regulations. Standard dimensions cm. 200x200, on request dimensions cm. 200x100 or cm. 100x100.
C3
Seat without backrest in colored polypropylene, finish with anti-ultraviolet light resistance treatment, reaction to fire class 1 according to the regulations in force issued by the Ministry of the Interior. Dimensions cm. 40 x 35 x 11.
S101
Small tribune lenght m. 2 m arranged on 3 rows, seat in polypropylene with fireproof backrest cl 1, plywood walking surfaces (other walking surfaces on request), rear wheels for quick overturning and storage in the warehouse. Capacity 12 seats, length 2 m, depth 1.90 m.
C5
Seat with high backrest in colored polypropylene, finish with anti-ultraviolet light resistance treatment, reaction to fire class 1 according to the regulations in force issued by the Ministry of the Interior. Dimensions cm.44 x 35 x 35.
S101.8
Small tribune lenght m. 2 m arranged on 2 rows, seat in polypropylene with fireproof backrest cl 1, plywood walking surfaces (other walking surfaces on request), rear wheels for quick overturning and storage in the warehouse. Capacity 8 seats, length 2 m, depth 1.20 m.
C11
Dividing curtain for gyms, consisting of a load-bearing structure anchored to the roof beams with special devices, 380V electric motor with gear electro-brake safety factor F = 2; on the two sides of the beam there are 2 electromechanical safety brakes, double PVC sheet of 900 g / m2 full height. Possibility of combined curtain with PVC sheet up to a height of 2.6 m while a square mesh net is positioned on the upper part. Upper structure for the winding of the awning in painted steel. Color of the fabric and structure to be chosen from among the available. Dimensions on request. Documentation: TUV DIN 18032/4 CERTIFICATE for the system EN 13501-1 CERTIFICATE for the PVC sheet
C12
Modular public/athletes dividers in according to UNI EN 13200-3, height 110 cm including n.1 hot zinced post section 70 x 20 mm + n ° 3 horizontal elements in round section 48 mm. Possibility of executing pedestrian gates with latch closure. Installation with ground plate or with ground sleeves. The dividers can be protected with shockproof material according to UNI EN 913 (on request). Other dividers can be made with steel, glass or plexiglass infill.