B906

Lift-up basketball facility from the ceiling with pantograph closure for heights 9/11 m .; connection structure to the upper beams in tubular profiles of adequate section, load-bearing trellis structure with main uprights section 80x50 mm suitably braced and hinged by means of special screws and pins. Rear articulated poles in tubular section 50x50 mm hinged together in order to allow the structure to be completely flattened to the ceiling, connection plates to the beams 10 mm thick. motor and complete with Ø 140 mm rope winding drum, easily adjustable limit switch kits installed directly on the gearbox. The facility s supplied complete with 12 mm thick tempered glass backboards with safety film dim. cm. 180x105,reclining baskets in according to regulaitons, nets and under-basket protections. BASKETBALL FACILITY CERTIFIED IN ACCORDANCE WITH UNI EN 1270,

B655

Wall lifting basketball facility consisting of a 100x30 mm tubular wall frame with special hinges, 50x50 mm section tubular protective trusses with 40x20 mm section bracing, 20 mm diameter rotation pins, backboard support frame with reinforced plate for basket attachment . Lifting system of the structure consisting of a manual clutch winch with a capacity of 500 kg, a 6 mm diameter anti-rotation rope and 90 mm diameter pulleys mounted on special plates, 8 mm diameter safety ropes complete with clamps and turnbuckles. Structure entirely painted with epoxy powders. The facility is supplied with bilaminate backboards thick. mm. 18, baskets in according to regulations and nets. Possibility of customizing the system. Standard overhang 325 cm. Assembly bolts class 8.8,

Z1000

Ballast for basketball facility B670/1N e volleyball facility V708/M

B672/1

pair of zinced steel basketball net

B651/T

Pair of transportable monotubular basketball systems, overhang 165 cm consisting of basement on the ground dimensions 200x120 cm, vertical uprights section 150x150 mm, flat support diagonals 5 mm thick, reinforced perimeter frame to support the backboard, 20/10 sheet metal ballast box placed on the rear part of the base. Structure complete in hot zinced steel, with provision for fixing to the ground, transport trolley (one for every 2 structures) complete with non-marking wheels.The facility is supplied complete with melamine resin backboard thick. mm. 10 dimensions 180x105 cm,baskets UNI EN standard and nets. Protections excluded. BASKETBALL FACILITY CERTIFIED IN ACCORDANCE WITH UNI EN 1270

B655/1

B660

Basketball backboard in bilaminated wood, thickness 18 mm. Dimensions in accoding to regulations, 180 x 105 cm.

B671

Basketball hoop full tubular ring, in painted steel, extra-strong model. Provided with TUV EN 1270 attestation of conformity.

202025

Crash protection device for basketball facility.

B608

Frame bright with red led for 24 seconds for basketball backboards.

B659/1

Fixed wall minibasket facility, 185 cm overhang consisting of a supporting structure in tubular steel with a diameter of 50 mm, painted with epoxy powders. The facility is supplied complete with minibasket backboards in bilaminate 18 mm thick, dimensions 120x90 cm, baskets in according to regulation and nets. backboard holder frame and ropes excluded. On request we provide estimates for basketball facilities with overhangs, backboards and customized baskets.

B661

Basketball backboard in trasparent plexiglass, thickness 15 mm, measures according to regulations 180 x 105 cm. Frame not included.

BLACK17

Designed to be adaptable and maneuverable, BLACK17 encompasses the entire philosophy of 3x3 basketball: dynamism, speed, and style.

B650/P

Pair of padded protection for basketball facility articles B650 and B650/1 in rubber foam thickness cm. 5 with covering in PVC. Dimensions cm 130x200.

B670

Basket on transportable upright, in painted steel, adjustable in height from 230 cm to 305 cm, by means of a periscope tube in galvanized steel, complete with base diameter of 60 cm and net.

B671/3

Basketball hoop, reinforced model, in painted steel.

B651/P

Pair of padded protection for basketball facilities B651, B654 and B651/2 in rubber foam thickness cm.5, covering in PVC, Dimensions: section 15x15 cm, height 200 cm.

B670/1N

Basket on transportable upright, consisting of a painted steel base, dimensions 100x70 cm with holes for fixing to the ground, vertical upright in painted steel Ø 56 mm with diagonal Ø 40 mm, zinced support upright to the backboard Ø 50 mm. The facility is supplied complete with PVC backboard,basket in according to regulation and net. Height adjustment from 170 cm to 260 cm. Ballast not included.

B650/2

Pair of folding basketball facility in hot-zinced steel consisting of basement on the ground dimensions 200x100 cm, vertical uprights and support upright to the backboard section 100x100 mm and perimeter backboard holder frame. The system is supplied complete with a 10 mm thick melamine resin backbaord, baskets in according to regulations, ballast box and nets. The ascent and descent of the structure is carried out by a manual rack reducer with removable handle. Overhang 160 cm ballast and protections excluded. Wheels for handling with automatic lowering, rubberized and non-marking. Predisposition for fixing to the ground. Minimum ballast 250 kg.

B664

Basketball backboard in melamine resin, thickness 10 mm, outdoor use, dimenions in according to regulations, 180 x 105 cm. Frame not included

B649/3

Basket and minibasket facility, with adjustable height , three steel metalized painted round section, post diameter 80 mm. with safety post blocking system; adjustable height from 260 cm. to 305 cm., by means of crank handle device with rack, polyethylene base with wheels which can be fill with water (105 Lt.) or sand (about 160 Kg.), polypropylene backboard 110x73 Cm.; regulation compliant painted steel basketball ring; nylon basketball net 3,5 mm.

B651/PT

Pair of padded protection for basketball facility B651/T

B678

Manual conversion device for basket minibasket systems. Made by two connecting rods with endless screw, moved by a removable rod. The device adjusts the basketball backboard to the different heights.

B670/1P

Padded protection for B670/N and V708/M.

B607

24 second support over basket

B665

Minibasket backboard in bilaminated wood, thickness 18 mm. Measures accoding to regulations, 120 x 90 cm.

B669/1F

Protection under basketball backboards, in coloured polyurethane. In according to F.I.B.A. regulations.

B649/1

Half basket-minibasket facility consisting of a base in painted steel dimensions 100 x 110 cm with predisposition for fixing to the ground, vertical upright in painted steel section 80x80m mm, support upright to the backboard section 70x70 mm overhang 60 cm. The facility is supplied complete with a mini-basket backboard in bilaminate with dimensions 120x90 cm, basket in accroding to regulations, net and wheels for transport in non-marking rubber installed on the structure. The movement in the basket and minibasket positions is obtained by means of a rack and pinion winch.

B671/1

Basketball hoop in painted steel.

B666

Minibasket backboard in melamine resin, thickness 10 mm, outdoor use, measures according to regulations, 120 x 90 cm.

406190

Frame in paintend steel for backboard in plexiglass, stratified crystal, melamine resin and wood.

B650

Pair of Olympic basketball systems consisting of Ø 50 steel supporting trusses with hot galvanized Ø 30 bracing, ground base in 50x50 square tubular pre-drilled for fixing, connection diagonals in tubular diam. 30 with holes for housing on the plates of the trusses, frame for fixing the 50x30 steel backboard to be fixed directly to the trusses by means of screws. The facility is supplied complete with melamine resin backboard thick. 10 mm dim. cm. 180x105, reinforced baskets in according to regulations and nets. Ballast box in 20/10 metal sheet fixed to the structure by means of curved plates 50x5 mm. Overhang 225 cm, assembly bolts in class 8.8

B667

Minibasket backboard, can be applied to any kind of basketball facility, structure in painted steel, with wooden backboard , basket in according to regulations and net.

B650/1

Pair of Olympic basketball systems consisting of Ø 50 steel supporting trusses with hot galvanized Ø 30 bracing, ground base in 50x50 square tubular pre-drilled for fixing, connection diagonals in tubular diam. 30 with holes for housing on the plates of the trusses, frame for fixing the 50x30 steel backboard to be fixed directly to the trusses by means of screws. The facility is supplied complete with melamine resin backboard thick. 10 mm dim. cm. 180x105, reinforced baskets in according to regulations and nets. Ballast box (ballast excluded) in 20/10 sheet metal fixed to the structure by means of curved plates 50x5 mm. The two structures are supplied with a trolley for transport in galvanized steel with wheels. Overhang 225 cm, assembly bolts in class 8.8

B673

Light basketball net in polypropylene, Ø 3 mm.

B671/2Z

Basketball hoop, in galvanized hot dipped steel, extra-strong model for outdoors.

MOVE19

MOVE19 is the foldable oleodynamic basketball hoop characterized by functionality that brings joy both to those who play with it and those who need to move it.

B673/C

Basketball net in high-tenacity nylon, Ø 6 mm.

B675

Basketball hoop full tubular ring, reclinable, in painted steel, safety patented rubber protection. Provided with TUV EN 1270 attestation of conformity.

B606

Alternating possession arrow. Dimensions and weight: 56x23,5x4 cm, 1.7 kg; Distance and readability angle: 90 m (295 ft), 150 degrees; Meets F.I.B.A. specifications; Lights formed by groups of leds (typical life: 100.000 hours!);Robust insulated plastic enclosure, without the need of using a ground connection. Provided with the power cord and plug; Power supply: 100-240 Vac, 50-60 Hz, 40 mA.

B905

Wall mounted side folding basketball facility, consisting of a 100x30 mm tubular wall frame with special hinges, 50x50 mm section tubular protruding trusses, support rods diameter 30 mm, rotation pins diameter 20 mm, perimeter frame supporting the backboard with reinforced plate for basket attachment, positioning slides with special spring pin for automatic search of positions with manual release. Structure entirely painted with epoxy powders. The facility is supplied with 18 mm thick bilaminate backboards, regulatory baskets and nets. Assembly bolts in class 8.8. Standard overhang 325 cm. BASKETBALL SYSTEM CERTIFIED IN ACCORDANCE WITH UNI EN 1270

B653

Wall-mounted side folding basketball facility approved F.I.B.A. 2° level consisting of tubular wall frame 100x30 mm with special hinges, tubular protruding trusses section 50x50 mm, support rods diameter 30 mm, rotation pins diameter 20 mm, perimeter frame supporting the backboard with reinforced plate for attacking the basket , positioning slides with special spring pin for automatic search of manual release positions. Structure entirely painted with epoxy powders. The facility is supplied with 12 mm thick tempered glass backboard with safety film, reclining baskets, protections under the basket and nets. Assembly bolts in class 8.8. Standard overhang 325 cm. BASKETBALL FACILITY APPROVED F.I.B.A. 2° LEVEL AND UNI EN 1270 CERTIFICATE

Sportshall in Varazze (SV) / Italy

Supply of a hydraulic transportable basketball facility FIBA approved

Related products for Basketball facility